1
Help / Re: Binary releases page has broken sourceforge links
« Last post by Miguel Gimenez on July 10, 2025, 11:07:19 am »Spam reported to moderator.
News:
The new Release 25.03 is out! You can download binaries for Windows and many major Linux distros here .
Recent Posts
2
General (but related to Code::Blocks) / Re: Welcome Newcomers - PLEASE READ!!!
« Last post by Geoff13 on July 06, 2025, 11:14:25 pm »Another real person.
Asked my first question, and have multiple helpful replies already!
Asked my first question, and have multiple helpful replies already!
3
Using Code::Blocks / Re: 25.03 Start Page : Linux vs Windows
« Last post by Geoff13 on July 06, 2025, 07:51:04 pm »Thanks blauzahn
4
Development / Re: Support for c++20 modules
« Last post by JorgenBest on July 06, 2025, 06:51:01 pm »I like to test the new module possibility and like it so far (just shortly started). I made a project template for using it with gcc or Clang (Arch Linux).
What I can do with modules:
1. use the std module with all library features for GCC or CLang
2. create my own modules
Downside is: when I add new modules I have to set the priority weight for compiling lower (e.g. to 10) for gcc. For Clang I need also to create a custom command to build and copy that in (copy the same code for every file).
See the attached main.cpp with a HelloWorld example. All other files can be constructed from this as well as the configuration in Codeblocks. I hope this helps, any one how likes to try modules.
I see two potential possibilities for what I provided: Others use these instructions to be able to work with modules from the Codeblocks IDE, even if it's not perfect.
Or secondly (what I would really like) an addition would be made to Codeblocks. Something (minimal?) like:
1. Add an build option: use C++modules (c++20 and higher should be selected) what adds the necessary compile options
2. Add an build option: use std module (this could add a std project file or create a compiled module in the project). Note the std module is not precompiled in gcc or clang, so the project has to do that, see my attachment.
3. Add the most used suffixes for modules and make those files compile in two steps: first create all the Compiled Module Interface (CMI) thus a gcm or pcm file. This has to be done before all other compilation and then create the object files.
4. Delete the CMI's when rebuilding / cleaning.
I think most of the needed functionality is already available in codeblocks for a solution to build modules. That's why I can make it work manually without too much trouble.
Note:
I doubt if giving 2 commands for clang in this custom build command is intended/allowed, but it works on my platform until now. The sequence of more than one commands seems to have different results than executing them from the command line (parallel execution?). For gcc I do both the CMI and object are made in one step (with standard compilation) and I only have to set the build priority so that's OK anyway.
If anything is not completely right I like to hear it, if it's not too much trouble. I didn't find complete documentation for custom build commands.
Note 2:
My solution builds the CMI's and object files of modules at the same time (but prior to other object files/main.o), so not according to point 3 of my proposal. This can lead to problems if modules have inter dependencies. Then the build weight should be used to build those modules in the right order.
Circular dependencies (that should be possible with modules as I understand) can't be build like that however. That's not really different from using headers I think. I don't know if I would use circular dependencies anyway. There's no easy way to couple 2 building commands to one C++ file in codeblocks and have them execute with different build weights. If I have to do that I need to trick codeblocks with empty files and custom build commands, what is not worth the trouble I think.
That's where an internal codeblock solution would be handy: if an extra building stage for CMI's was introduced prior to building object files the whole dependency handling would be very simple: just build the CMI's first.
I have no clue of the codeblocks source code, but I will be happy to help with what I can do regarding to modules.
What I can do with modules:
1. use the std module with all library features for GCC or CLang
2. create my own modules
Downside is: when I add new modules I have to set the priority weight for compiling lower (e.g. to 10) for gcc. For Clang I need also to create a custom command to build and copy that in (copy the same code for every file).
See the attached main.cpp with a HelloWorld example. All other files can be constructed from this as well as the configuration in Codeblocks. I hope this helps, any one how likes to try modules.
I see two potential possibilities for what I provided: Others use these instructions to be able to work with modules from the Codeblocks IDE, even if it's not perfect.
Or secondly (what I would really like) an addition would be made to Codeblocks. Something (minimal?) like:
1. Add an build option: use C++modules (c++20 and higher should be selected) what adds the necessary compile options
2. Add an build option: use std module (this could add a std project file or create a compiled module in the project). Note the std module is not precompiled in gcc or clang, so the project has to do that, see my attachment.
3. Add the most used suffixes for modules and make those files compile in two steps: first create all the Compiled Module Interface (CMI) thus a gcm or pcm file. This has to be done before all other compilation and then create the object files.
4. Delete the CMI's when rebuilding / cleaning.
I think most of the needed functionality is already available in codeblocks for a solution to build modules. That's why I can make it work manually without too much trouble.
Note:
I doubt if giving 2 commands for clang in this custom build command is intended/allowed, but it works on my platform until now. The sequence of more than one commands seems to have different results than executing them from the command line (parallel execution?). For gcc I do both the CMI and object are made in one step (with standard compilation) and I only have to set the build priority so that's OK anyway.
If anything is not completely right I like to hear it, if it's not too much trouble. I didn't find complete documentation for custom build commands.
Note 2:
My solution builds the CMI's and object files of modules at the same time (but prior to other object files/main.o), so not according to point 3 of my proposal. This can lead to problems if modules have inter dependencies. Then the build weight should be used to build those modules in the right order.
Circular dependencies (that should be possible with modules as I understand) can't be build like that however. That's not really different from using headers I think. I don't know if I would use circular dependencies anyway. There's no easy way to couple 2 building commands to one C++ file in codeblocks and have them execute with different build weights. If I have to do that I need to trick codeblocks with empty files and custom build commands, what is not worth the trouble I think.
That's where an internal codeblock solution would be handy: if an extra building stage for CMI's was introduced prior to building object files the whole dependency handling would be very simple: just build the CMI's first.
I have no clue of the codeblocks source code, but I will be happy to help with what I can do regarding to modules.
5
Using Code::Blocks / Re: 25.03 Start Page : Linux vs Windows
« Last post by blauzahn on July 06, 2025, 05:27:36 pm »you can find version information in: Help | About | Information
or as an example for wxwidgets in a terminal: wx-config --version
or as an example for wxwidgets in a terminal: wx-config --version
6
Using Code::Blocks / Re: 25.03 Start Page : Linux vs Windows
« Last post by Geoff13 on July 06, 2025, 04:35:18 pm »ollybg :
I have installed from the downloads page. Not sure if the file you reference is only available if I build from source. I'm too new to Linux to try that.
Miguel :
I've been using Windows for decades but seeing if I can avoid 11 by switching to Linux. I'm new and not sure how to answer some of your questions. If you can give me a hint I'll look for the other answers.
I'm running Linux Mint 22.1 Cinnamon. No idea about wxWidgets or GTK. Perhaps my installation process will answer those?
I had installed CB from the Software Manager. This gave me version 24.xx. Recently I downloaded the 25.03_amd64_debian12 file from the CB site and followed these instructions to install it : https://ubuntuhandbook.org/index.php/2025/04/codeblocks-25-03-howto-install/
I have installed from the downloads page. Not sure if the file you reference is only available if I build from source. I'm too new to Linux to try that.
Miguel :
I've been using Windows for decades but seeing if I can avoid 11 by switching to Linux. I'm new and not sure how to answer some of your questions. If you can give me a hint I'll look for the other answers.
I'm running Linux Mint 22.1 Cinnamon. No idea about wxWidgets or GTK. Perhaps my installation process will answer those?
I had installed CB from the Software Manager. This gave me version 24.xx. Recently I downloaded the 25.03_amd64_debian12 file from the CB site and followed these instructions to install it : https://ubuntuhandbook.org/index.php/2025/04/codeblocks-25-03-howto-install/
7
Using Code::Blocks / Re: 25.03 Start Page : Linux vs Windows
« Last post by Miguel Gimenez on July 06, 2025, 12:15:40 pm »Works for me on Mint 18 with stock wxWidgets 3.0.5, which version of Mint/wxWidgets/GTK are you using?
8
Help / Re: Using 'ThreadSearch'
« Last post by LETARTARE on July 06, 2025, 10:59:44 am »Thanks you.
But I had hoped that a combination of keys existed.
But I had hoped that a combination of keys existed.
9
Using Code::Blocks / Any way to get C++23 support on Pop!_OS?
« Last post by Jarrod on July 06, 2025, 10:31:09 am »I've been trying unsuccessfully to get C++23 support in Code Blocks. I'm on Pop!_OS 22.04 LTS. The Code Blocks release from the Pop Shop is 20.03. I have gcc-12 on my system and CB is pointing at those Toolchain executables. The most recent standard option is C++17 though and adding "-std=c++23" to the compiler options field doesn't actually change the standard used. My next thought was to update Code Blocks manually to the new 25.03 release but the website only has a version for Debian. Will that work on Pop!_OS? Or is there some other secret voodoo I haven't found yet to get C++23 support?
10
Using Code::Blocks / Re: 25.03 Start Page : Linux vs Windows
« Last post by ollydbg on July 06, 2025, 02:05:53 am »Thanks for the report, I think this is a bug.
There is a file named:
src/src/resources/start_here/start_here.html
I think C::B just uses some html viewer window to show this html file.
I'm not fully understand the logic, but my guess is that the contents of the html get modified dynamically, so the recent opened entries get added.
Maybe the Windows and Linux use different html viewer code?
There is a file named:
src/src/resources/start_here/start_here.html
I think C::B just uses some html viewer window to show this html file.
I'm not fully understand the logic, but my guess is that the contents of the html get modified dynamically, so the recent opened entries get added.
Maybe the Windows and Linux use different html viewer code?