« previous next »
Pages: [1]   Go Down

Author Topic: Cannot build Code::Blocks from source  (Read 4990 times)

Offline alexchen

  • Multiple posting newcomer
  • *
  • Posts: 84
Cannot build Code::Blocks from source
« on: April 30, 2019, 02:43:31 am »
I try to build Code::Blocks from source in CentOS 7.6 but it fails.
 
1. I get the source code from trunk:
    svn export http://svn.code.sf.net/p/codeblocks/code/trunk

2. Install wxGTK development pre-requisite
    yum install -y wxGTK-devel

3. Run the commands as listed in http://wiki.codeblocks.org/index.php/Installing_Code::Blocks_from_source_on_RPM_based_distributions#Build_the_RPM_package
    cd trunk
    ./bootstrap
    ./configure
    make dist

4. I get the following errors in 'make dist'
make[4]: Leaving directory `/home/fmserver/Downloads/CodeBlocks/trunk/src/plugins/xpmanifest'
 (cd contrib && make  top_distdir=../../../codeblocks-17.12svn0 distdir=../../../codeblocks-17.12svn0/src/plugins/contrib \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory `/home/fmserver/Downloads/CodeBlocks/trunk/src/plugins/contrib'
make[4]: *** No rule to make target `FortranProject/*.h', needed by `distdir'.  Stop.
make[4]: Leaving directory `/home/fmserver/Downloads/CodeBlocks/trunk/src/plugins/contrib'
make[3]: *** [distdir] Error 1
make[3]: Leaving directory `/home/fmserver/Downloads/CodeBlocks/trunk/src/plugins'
make[2]: *** [distdir] Error 1
make[2]: Leaving directory `/home/fmserver/Downloads/CodeBlocks/trunk/src'
make[1]: *** [distdir] Error 1
make[1]: Leaving directory `/home/fmserver/Downloads/CodeBlocks/trunk'
make: *** [dist] Error 2
Logged

Offline alexchen

  • Multiple posting newcomer
  • *
  • Posts: 84
Re: Cannot build Code::Blocks from source
« Reply #1 on: April 30, 2019, 03:29:34 am »
I rebuild the source with the following commands and get a different error.
* ./configure --enable-fortran
* make all
* make list
....
make[7]: Entering directory '/home/fmserver/Downloads/CodeBlocks/trunk/src/plugins/contrib'
make  distdir-am
make[8]: Entering directory '/home/fmserver/Downloads/CodeBlocks/trunk/src/plugins/contrib'
make[8]: *** No rule to make target 'FortranProject/images/*.png', needed by 'distdir-am'.  Stop.
make[8]: Leaving directory '/home/fmserver/Downloads/CodeBlocks/trunk/src/plugins/contrib'
make[7]: *** [Makefile:709: distdir] Error 2
make[7]: Leaving directory '/home/fmserver/Downloads/CodeBlocks/trunk/src/plugins/contrib'
make[6]: *** [Makefile:626: distdir-am] Error 1
make[6]: Leaving directory '/home/fmserver/Downloads/CodeBlocks/trunk/src/plugins'
make[5]: *** [Makefile:622: distdir] Error 2
make[5]: Leaving directory '/home/fmserver/Downloads/CodeBlocks/trunk/src/plugins'
make[4]: *** [Makefile:636: distdir-am] Error 1
make[4]: Leaving directory '/home/fmserver/Downloads/CodeBlocks/trunk/src'
make[3]: *** [Makefile:632: distdir] Error 2
make[3]: Leaving directory '/home/fmserver/Downloads/CodeBlocks/trunk/src'
make[2]: *** [Makefile:776: distdir-am] Error 1
make[2]: Leaving directory '/home/fmserver/Downloads/CodeBlocks/trunk'
make[1]: *** [Makefile:770: distdir] Error 2
make[1]: Leaving directory '/home/fmserver/Downloads/CodeBlocks/trunk'
make: *** [Makefile:871: dist] Error 2
Logged

Offline alexchen

  • Multiple posting newcomer
  • *
  • Posts: 84
Re: Cannot build Code::Blocks from source
« Reply #2 on: April 30, 2019, 03:37:53 am »
I am able to finish the build with a different configure flag
* ./configure --disable-fortran
* make all
* make list

How do I build an installable RPM after this?
Where do I run the command 'rpmbuild --rebuild codeblocks*.src.rpm' from?  (This is part of the instructions to build the RPM.)
Logged

Offline sodev

  • Lives here!
  • ****
  • Posts: 500
Re: Cannot build Code::Blocks from source
« Reply #3 on: April 30, 2019, 04:12:45 am »
Why do you export the svn repository? This removes the svn metadata which will lead to revision 0 in the about box which is not really helpful. Plus without extra parameters it doesnt include the externals, thats why FortranProject is missing for you.
Logged

Offline alexchen

  • Multiple posting newcomer
  • *
  • Posts: 84
Re: Cannot build Code::Blocks from source
« Reply #4 on: April 30, 2019, 08:29:52 pm »

I use 'svn checkout' to get the source code but 'make dist' still gives me the same error.
  • svn checkout http://svn.code.sf.net/p/codeblocks/code/trunk
  • cd trunk
  • ./bootstrap
  • ./configure
  • make all <----- This works.
  • sudo make install <--------- This works, too.
  • make list <----- This fails.  Is it OK to ignore the errors?
    make[4]: Entering directory `/home/fmserver/Downloads/CodeBlocks.http/trunk/src/plugins/contrib'
    make[4]: *** No rule to make target `FortranProject/images/*.png', needed by `distdir'.  Stop.
    make[4]: Leaving directory `/home/fmserver/Downloads/CodeBlocks.http/trunk/src/plugins/contrib'
    make[3]: *** [distdir] Error 1
    make[3]: Leaving directory `/home/fmserver/Downloads/CodeBlocks.http/trunk/src/plugins'
    make[2]: *** [distdir] Error 1
    make[2]: Leaving directory `/home/fmserver/Downloads/CodeBlocks.http/trunk/src'
    make[1]: *** [distdir] Error 1
    make[1]: Leaving directory `/home/fmserver/Downloads/CodeBlocks.http/trunk'
    make: *** [dist] Error 2
Question: how do I build the RPM?
According to the instruction, I need to run 'rpmbuild --rebuild codeblocks*.src.rpm'.  But where to run it from?
Logged

Offline oBFusCATed

  • Developer
  • Lives here!
  • *****
  • Posts: 13413
    • Travis build status
Re: Cannot build Code::Blocks from source
« Reply #5 on: April 30, 2019, 08:35:33 pm »
Code
./bootstrap
./configure
make dist
rpmbuild -ba codeblocks*.tar.*

If you like you can use a separate build folder.
Logged
(most of the time I ignore long posts)
[strangers don't send me private messages, I'll ignore them; post a topic in the forum, but first read the rules!]

Offline alexchen

  • Multiple posting newcomer
  • *
  • Posts: 84
Re: Cannot build Code::Blocks from source
« Reply #6 on: April 30, 2019, 08:47:46 pm »
Because 'make dist' cannot finish the build, I get the following errors:

$ pwd
/home/fmserver/Downloads/CodeBlocks.http/trunk

$ sudo make dist
[sudo] password for fmserver:
make  dist-bzip2 am__post_remove_distdir='@:'
make[1]: Entering directory `/home/fmserver/Downloads/CodeBlocks.http/trunk'
if test -d "codeblocks-17.12svn11664"; then find "codeblocks-17.12svn11664" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "codeblocks-17.12svn11664" || { sleep 5 && rm -rf "codeblocks-17.12svn11664"; }; else :; fi
test -d "codeblocks-17.12svn11664" || mkdir "codeblocks-17.12svn11664"
 (cd src && make  top_distdir=../codeblocks-17.12svn11664 distdir=../codeblocks-17.12svn11664/src \
....
....
make[4]: Entering directory `/home/fmserver/Downloads/CodeBlocks.http/trunk/src/plugins/contrib'
make[4]: *** No rule to make target `FortranProject/images/*.png', needed by `distdir'.  Stop. <-----  This is killing the build.
make[4]: Leaving directory `/home/fmserver/Downloads/CodeBlocks.http/trunk/src/plugins/contrib'
make[3]: *** [distdir] Error 1
make[3]: Leaving directory `/home/fmserver/Downloads/CodeBlocks.http/trunk/src/plugins'
make[2]: *** [distdir] Error 1
make[2]: Leaving directory `/home/fmserver/Downloads/CodeBlocks.http/trunk/src'
make[1]: *** [distdir] Error 1
make[1]: Leaving directory `/home/fmserver/Downloads/CodeBlocks.http/trunk'
make: *** [dist] Error 2

$ rpmbuild -ba codeblocks*.tar.*
error: failed to stat /home/fmserver/Downloads/CodeBlocks.http/trunk/codeblocks*.tar.*: No such file or directory

Logged

Offline oBFusCATed

  • Developer
  • Lives here!
  • *****
  • Posts: 13413
    • Travis build status
Re: Cannot build Code::Blocks from source
« Reply #7 on: April 30, 2019, 11:53:02 pm »
Pass --disable-fortran or make sure you download the external fortranproject...
Logged
(most of the time I ignore long posts)
[strangers don't send me private messages, I'll ignore them; post a topic in the forum, but first read the rules!]

Offline alexchen

  • Multiple posting newcomer
  • *
  • Posts: 84
Re: Cannot build Code::Blocks from source
« Reply #8 on: May 01, 2019, 12:11:18 am »
I am running CentOS 7.6 and I use the command "svn checkout http://svn.code.sf.net/p/codeblocks/code/trunk" to get the source.  The output shows 'Fortran' plugin is downloaded:
A    trunk/src
A    trunk/src/sdk
A    trunk/src/sdk/resources
A    trunk/src/sdk/resources/lexers
A    trunk/src/sdk/editormanager.cpp
A    trunk/src/sdk/scriptingmanager.cpp
....
....
A    trunk/bundle.sh.in
A    trunk/README.debian
A    trunk/COMPILERS
A    trunk/NEWS
 U   trunk

Fetching external item into 'trunk/src/plugins/contrib/FortranProject':
A    trunk/src/plugins/contrib/FortranProject/resources
A    trunk/src/plugins/contrib/FortranProject/images
A    trunk/src/plugins/contrib/FortranProject/images/22x22
A    trunk/src/plugins/contrib/FortranProject/images/32x32
A    trunk/src/plugins/contrib/FortranProject/images/fortranproject
A    trunk/src/plugins/contrib/FortranProject/images/fortranproject/16x16
A    trunk/src/plugins/contrib/FortranProject/images/fortranproject/16x16/fprojectjumpback.png
A    trunk/src/plugins/contrib/FortranProject/images/fortranproject/16x16/interface_function_gen.png
A    trunk/src/plugins/contrib/FortranProject/images/fortranproject/16x16/fprojectjumphome.png
A    trunk/src/plugins/contrib/FortranProject/fortranproject.cpp
A    trunk/src/plugins/contrib/FortranProject/resources/fortranprojecttoolbar.xrc
A    trunk/src/plugins/contrib/FortranProject/resources/workspacebrowserf.xrc
A    trunk/src/plugins/contrib/FortranProject/images/fortranproject/16x16/interface_private.png
A    trunk/src/plugins/contrib/FortranProject/images/fortranproject/16x16/interface_subroutine_gen_private.png


I can complete 'make dist' if I use './configure --disable-fortran'.  But it still fails in 'rpmbuild'.
$ make dist
make  dist-bzip2 am__post_remove_distdir='@:'
make[1]: Entering directory `/home/fmserver/Downloads/CodeBlocks.http/trunk'
if test -d "codeblocks-17.12svn11664"; then find "codeblocks-17.12svn11664" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "codeblocks-17.12svn11664" || { sleep 5 && rm -rf "codeblocks-17.12svn11664"; }; else :; fi
test -d "codeblocks-17.12svn11664" || mkdir "codeblocks-17.12svn11664"
 (cd src && make  top_distdir=../codeblocks-17.12svn11664 distdir=../codeblocks-17.12svn11664/src \
.....
....
|| find "codeblocks-17.12svn11664" -type d ! -perm -755 \
   -exec chmod u+rwx,go+rx {} \; -o \
  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
  ! -type d ! -perm -444 -exec /bin/sh /home/fmserver/Downloads/CodeBlocks.http/trunk/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "codeblocks-17.12svn11664"
tardir=codeblocks-17.12svn11664 && /bin/sh /home/fmserver/Downloads/CodeBlocks.http/trunk/missing tar chf - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >codeblocks-17.12svn11664.tar.bz2
make[1]: Leaving directory `/home/fmserver/Downloads/CodeBlocks.http/trunk'
if test -d "codeblocks-17.12svn11664"; then find "codeblocks-17.12svn11664" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "codeblocks-17.12svn11664" || { sleep 5 && rm -rf "codeblocks-17.12svn11664"; }; else :; fi

$ rpmbuild -ba codeblocks*.tar.*
error: File /home/fmserver/Downloads/CodeBlocks.http/trunk/codeblocks-17.12svn11664.tar.bz2 does not appear to be a specfile.

I was able to build revision 11558 with 'make' and the RPM.
(I forgot the command to build RPM, but now I will keep this in mind.)

Can you build the RPM from the instructions in "http://wiki.codeblocks.org/index.php/Installing_Code::Blocks_from_source_on_RPM_based_distributions#Build_the_RPM_package"?
Logged

Offline oBFusCATed

  • Developer
  • Lives here!
  • *****
  • Posts: 13413
    • Travis build status
Re: Cannot build Code::Blocks from source
« Reply #9 on: May 01, 2019, 01:13:33 am »
Sorry rpmbuild -ta is the correct command...
Logged
(most of the time I ignore long posts)
[strangers don't send me private messages, I'll ignore them; post a topic in the forum, but first read the rules!]

Offline alexchen

  • Multiple posting newcomer
  • *
  • Posts: 84
Re: Cannot build Code::Blocks from source
« Reply #10 on: May 01, 2019, 02:09:42 am »
Thanks.  The build is now complete.  This is what I learn from the exercise:
  • Run './configure --disable-fortran' after './bootstrap' in the first pass, otherwise it will fail in 'make dist'.
  • Only need to run 'make dist' to create the *tar.bz2 file. There is no need to run 'make', 'make all', etc.
  • Resulting RPM files are located in $HOME/rpmbuild/RPMS/x86_64

Thanks for all the help.  I hope someone can figure out why 'make dist' fails unless '--disable-fortran' is specified during configuration. (Sorry, I am just a simple user not a Code::Blocks developer.)
Logged
Pages: [1]   Go Up
« previous next »