Author Topic: MCS51 Project unsupported *.o file?  (Read 25142 times)

Offline zaazbb

  • Multiple posting newcomer
  • *
  • Posts: 14
MCS51 Project unsupported *.o file?
« on: July 12, 2014, 06:04:06 pm »
codeblocks: CB_20140706_rev9844_win32.7z
SDCC: sdcc-3.4.0-setup.exe

Create MCS51 Project use project template, and build, met a warning 119: don't know what to do with file 'obj\Debug\main.o'. file extension unsupported.
and, no hex file producted.

full message as below:

-------------- Build: Debug in sdcc_51 (compiler: SDCC Compiler)---------------

sdcc.exe -LC:\sdcc\lib -LD:\soft\SDCC\lib -o bin\Debug\sdcc_51.ihx -mmcs51 --model-small  --debug  --out-fmt-ihx -mmcs51 --opt-code-speed --debug   --xram-size 4096 --iram-size 256 --code-size 65536 --out-fmt-ihx   obj\Debug\main.o
at 1: warning 119: don't know what to do with file 'obj\Debug\main.o'. file extension unsupported
SDCC : mcs51/z80/z180/r2k/r3ka/gbz80/tlcs90/ds390/pic16/pic14/TININative/ds400/hc08/s08/stm8 3.4.0 #8981 (Apr  5 2014) (MINGW32)
published under GNU General Public License (GPL)
Usage : sdcc [options] filename
Options :-
General options:
      --help                Display this help
  -v  --version             Display sdcc's version
      --verbose             Trace calls to the preprocessor, assembler, and linker
  -V                        Execute verbosely. Show sub commands as they are run
  -d                        
  -D                        Define macro as in -Dmacro
  -I                        Add to the include (*.h) path, as in -Ipath
  -A                        
  -U                        
  -M                        Preprocessor option
  -W                        Pass through options to the pre-processor (p), assembler (a) or linker (l)
  -S                        Compile only; do not assemble or link
  -c  --compile-only        Compile and assemble, but do not link
  -E  --preprocessonly      Preprocess only, do not compile
      --c1mode              Act in c1 mode.  The standard input is preprocessed code, the output is assembly code.
  -o                        Place the output into the given path resp. file
      --print-search-dirs   display the directories in the compiler's search path
      --vc                  messages are compatible with Micro$oft visual studio
      --use-stdout          send errors to stdout instead of stderr
      --nostdlib            Do not include the standard library directory in the search path
      --nostdinc            Do not include the standard include directory in the search path
      --less-pedantic       Disable some of the more pedantic warnings
      --disable-warning     <nnnn> Disable specific warning
      --Werror              Treat the warnings as errors
      --debug               Enable debugging symbol output
      --cyclomatic          Display complexity of compiled functions
      --std-c89             Use C89 standard (slightly incomplete)
      --std-sdcc89          Use C89 standard with SDCC extensions (default)
      --std-c99             Use C99 standard (incomplete)
      --std-sdcc99          Use C99 standard with SDCC extensions
      --std-c11             Use C11 standard (very incomplete)
      --fdollars-in-identifiers  Permit '$' as an identifier character
      --funsigned-char      Make "char" unsigned by default
      --use-non-free        Search / include non-free licensed libraries and header files
Code generation options:
  -m                        Set the port to use e.g. -mz80.
  -p                        Select port specific processor e.g. -mpic14 -p16f84
      --model-small         internal data space is used (default)
      --model-medium        external paged data space is used
      --model-large         external data space is used
      --model-huge          functions are banked, data in external space
      --stack-auto          Stack automatic variables
      --xstack              Use external stack
      --int-long-reent      Use reentrant calls on the int and long support functions
      --float-reent         Use reentrant calls on the float support functions
      --xram-movc           Use movc instead of movx to read xram (xdata)
      --callee-saves        <func[,func,...]> Cause the called function to save registers instead of the caller
      --profile             On supported ports, generate extra profiling information
      --fomit-frame-pointer  Leave out the frame pointer.
      --all-callee-saves    callee will always save registers used
      --stack-probe         insert call to function __stack_probe at each function prologue
      --no-xinit-opt        don't memcpy initialized xram from code
      --no-c-code-in-asm    don't include c-code as comments in the asm file
      --no-peep-comments    don't include peephole optimizer comments
      --short-is-8bits      Make short 8 bits (for old times sake)
      --codeseg             <name> use this name for the code segment
      --constseg            <name> use this name for the const segment
Optimization options:
      --nooverlay           Disable overlaying leaf function auto variables
      --nogcse              Disable the GCSE optimisation
      --nolabelopt          Disable label optimisation
      --noinvariant         Disable optimisation of invariants
      --noinduction         Disable loop variable induction
      --nojtbound           Don't generate boundary check for jump tables
      --noloopreverse       Disable the loop reverse optimisation
      --no-peep             Disable the peephole assembly file optimisation
      --no-reg-params       On some ports, disable passing some parameters in registers
      --peep-asm            Enable peephole optimization on inline assembly
      --peep-return         Enable peephole optimization for return instructions
      --no-peep-return      Disable peephole optimization for return instructions
      --peep-file           <file> use this extra peephole file
      --opt-code-speed      Optimize for code speed rather than size
      --opt-code-size       Optimize for code size rather than speed
      --max-allocs-per-node  Maximum number of register assignments considered at each node of the tree decomposition
      --nolospre            Disable lospre
      --lospre-unsafe-read  Allow unsafe reads in lospre
Internal debugging options:
      --dump-ast            Dump front-end AST before generating i-code
      --dump-i-code         Dump the i-code structure at all stages
      --dump-graphs         Dump graphs (control-flow, conflict, etc)
      --i-code-in-asm       Include i-code as comments in the asm file
      --fverbose-asm        Include code generator comments in the asm output
Linker options:
  -l                        Include the given library in the link
  -L                        Add the next field to the library search path
      --lib-path            <path> use this path to search for libraries
      --out-fmt-ihx         Output in Intel hex format
      --out-fmt-s19         Output in S19 hex format
      --xram-loc            <nnnn> External Ram start location
      --xram-size           <nnnn> External Ram size
      --iram-size           <nnnn> Internal Ram size
      --xstack-loc          <nnnn> External Stack start location
      --code-loc            <nnnn> Code Segment Location
      --code-size           <nnnn> Code Segment size
      --stack-loc           <nnnn> Stack pointer initial value
      --data-loc            <nnnn> Direct data start location
      --idata-loc          
      --no-optsdcc-in-asm   Do not emit .optsdcc in asm
Special options for the mcs51 port:
      --stack-size          Tells the linker to allocate this space for stack
      --parms-in-bank1      use Bank1 for parameter passing
      --pack-iram           Tells the linker to pack variables in internal ram (default)
      --no-pack-iram        Deprecated: Tells the linker not to pack variables in internal ram
      --acall-ajmp          Use acall/ajmp instead of lcall/ljmp
      --no-ret-without-call  Do not use ret independent of acall/lcall
Special options for the z80 port:
      --callee-saves-bc     Force a called function to always save BC
      --portmode=           Determine PORT I/O mode (z80/z180)
      --asm=                Define assembler name (rgbds/asxxxx/isas/z80asm)
      --codeseg             <name> use this name for the code segment
      --constseg            <name> use this name for the const segment
      --no-std-crt0         For the z80/gbz80 do not link default crt0.rel
      --reserve-regs-iy     Do not use IY (incompatible with --fomit-frame-pointer)
      --oldralloc           Use old register allocator
      --fno-omit-frame-pointer  Do not omit frame pointer
Special options for the z180 port:
      --callee-saves-bc     Force a called function to always save BC
      --portmode=           Determine PORT I/O mode (z80/z180)
      --asm=                Define assembler name (rgbds/asxxxx/isas/z80asm)
      --codeseg             <name> use this name for the code segment
      --constseg            <name> use this name for the const segment
      --no-std-crt0         For the z80/gbz80 do not link default crt0.rel
      --reserve-regs-iy     Do not use IY (incompatible with --fomit-frame-pointer)
      --oldralloc           Use old register allocator
      --fno-omit-frame-pointer  Do not omit frame pointer
Special options for the r2k port:
      --callee-saves-bc     Force a called function to always save BC
      --portmode=           Determine PORT I/O mode (z80/z180)
      --asm=                Define assembler name (rgbds/asxxxx/isas/z80asm)
      --codeseg             <name> use this name for the code segment
      --constseg            <name> use this name for the const segment
      --no-std-crt0         For the z80/gbz80 do not link default crt0.rel
      --reserve-regs-iy     Do not use IY (incompatible with --fomit-frame-pointer)
      --oldralloc           Use old register allocator
      --fno-omit-frame-pointer  Do not omit frame pointer
Special options for the r3ka port:
      --callee-saves-bc     Force a called function to always save BC
      --portmode=           Determine PORT I/O mode (z80/z180)
      --asm=                Define assembler name (rgbds/asxxxx/isas/z80asm)
      --codeseg             <name> use this name for the code segment
      --constseg            <name> use this name for the const segment
      --no-std-crt0         For the z80/gbz80 do not link default crt0.rel
      --reserve-regs-iy     Do not use IY (incompatible with --fomit-frame-pointer)
      --oldralloc           Use old register allocator
      --fno-omit-frame-pointer  Do not omit frame pointer
Special options for the gbz80 port:
      -bo                   <num> use code bank <num>
      -ba                   <num> use data bank <num>
      --callee-saves-bc     Force a called function to always save BC
      --codeseg             <name> use this name for the code segment
      --constseg            <name> use this name for the const segment
      --no-std-crt0         For the z80/gbz80 do not link default crt0.rel
Special options for the tlcs90 port:
      --callee-saves-bc     Force a called function to always save BC
      --portmode=           Determine PORT I/O mode (z80/z180)
      --asm=                Define assembler name (rgbds/asxxxx/isas/z80asm)
      --codeseg             <name> use this name for the code segment
      --constseg            <name> use this name for the const segment
      --no-std-crt0         For the z80/gbz80 do not link default crt0.rel
      --reserve-regs-iy     Do not use IY (incompatible with --fomit-frame-pointer)
      --oldralloc           Use old register allocator
      --fno-omit-frame-pointer  Do not omit frame pointer
Special options for the ds390 port:
      --model-flat24        use the flat24 model for the ds390 (default)
      --stack-8bit          use the 8bit stack for the ds390 (not supported yet)
      --stack-size          Tells the linker to allocate this space for stack
      --pack-iram           Tells the linker to pack variables in internal ram (default)
      --no-pack-iram        Deprecated: Tells the linker not to pack variables in internal ram
      --stack-10bit         use the 10bit stack for ds390 (default)
      --use-accelerator     generate code for ds390 arithmetic accelerator
      --protect-sp-update   will disable interrupts during ESP:SP updates
      --parms-in-bank1      use Bank1 for parameter passing
Special options for the pic16 port:
      --pstack-model=       use stack model 'small' (default) or 'large'
  -y  --extended            enable Extended Instruction Set/Literal Offset Addressing mode
      --pno-banksel         do not generate BANKSEL assembler directives
      --obanksel=           set banksel optimization level (default=0 no)
      --denable-peeps       explicit enable of peepholes
      --no-optimize-goto    do NOT use (conditional) BRA instead of GOTO
      --optimize-cmp        try to optimize some compares
      --optimize-df         thoroughly analyze data flow (memory and time intensive!)
      --asm=                Use alternative assembler
      --mplab-comp          enable compatibility mode for MPLAB utilities (MPASM/MPLINK)
      --link=               Use alternative linker
      --preplace-udata-with=  Place udata variables at another section: udata_acs, udata_ovr, udata_shr
      --ivt-loc=            Set address of interrupt vector table.
      --nodefaultlibs       do not link default libraries when linking
      --use-crt=            use <crt-o> run-time initialization module
      --no-crt              do not link any default run-time initialization module
      --debug-xtra          show more debug info in assembly output
      --debug-ralloc        dump register allocator debug file *.d
      --pcode-verbose       dump pcode related info
      --calltree            dump call tree in .calltree file
      --gstack              trace stack pointer push/pop to overflow
      --no-warn-non-free    suppress warning on absent --use-non-free option
Special options for the pic14 port:
      --debug-xtra          show more debug info in assembly output
      --no-pcode-opt        disable (slightly faulty) optimization on pCode
      --stack-size          sets the size if the argument passing stack (default: 16, minimum: 4)
      --no-extended-instructions  forbid use of the extended instruction set (e.g., ADDFSR)
      --no-warn-non-free    suppress warning on absent --use-non-free option
Special options for the TININative port:
      --model-flat24        use the flat24 model for the ds390 (default)
      --stack-8bit          use the 8bit stack for the ds390 (not supported yet)
      --stack-size          Tells the linker to allocate this space for stack
      --pack-iram           Tells the linker to pack variables in internal ram (default)
      --no-pack-iram        Deprecated: Tells the linker not to pack variables in internal ram
      --stack-10bit         use the 10bit stack for ds390 (default)
      --use-accelerator     generate code for ds390 arithmetic accelerator
      --protect-sp-update   will disable interrupts during ESP:SP updates
      --parms-in-bank1      use Bank1 for parameter passing
      --tini-libid          <nnnn> LibraryID used in -mTININative
Special options for the ds400 port:
      --model-flat24        use the flat24 model for the ds400 (default)
      --stack-8bit          use the 8bit stack for the ds400 (not supported yet)
      --stack-size          Tells the linker to allocate this space for stack
      --pack-iram           Tells the linker to pack variables in internal ram (default)
      --no-pack-iram        Deprecated: Tells the linker not to pack variables in internal ram
      --stack-10bit         use the 10bit stack for ds400 (default)
      --use-accelerator     generate code for ds400 arithmetic accelerator
      --protect-sp-update   will disable interrupts during ESP:SP updates
      --parms-in-bank1      use Bank1 for parameter passing
Special options for the hc08 port:
      --out-fmt-elf         Output executable in ELF format
      --oldralloc           Use old register allocator
Special options for the s08 port:
      --out-fmt-elf         Output executable in ELF format
      --oldralloc           Use old register allocator
Process terminated with status 1 (0 minute(s), 0 second(s))
0 error(s), 0 warning(s) (0 minute(s), 0 second(s))
 

Offline oBFusCATed

  • Developer
  • Lives here!
  • *****
  • Posts: 13413
    • Travis build status
Re: MCS51 Project unsupported *.o file?
« Reply #1 on: July 12, 2014, 06:58:57 pm »
Does it work with an older nightly or 13.12, or even 12.11?
(most of the time I ignore long posts)
[strangers don't send me private messages, I'll ignore them; post a topic in the forum, but first read the rules!]

Offline scarphin

  • Lives here!
  • ****
  • Posts: 644
Re: MCS51 Project unsupported *.o file?
« Reply #2 on: July 12, 2014, 08:01:55 pm »
Actually SDCC uses .rel extension instead of .o extension for object files. You have to configure CB to use .rel extension in the advanced settings somewhere.

Offline Alpha

  • Developer
  • Lives here!
  • *****
  • Posts: 1513
Re: MCS51 Project unsupported *.o file?
« Reply #3 on: July 12, 2014, 08:20:45 pm »
Related link: http://forums.codeblocks.org/index.php/topic,16463.msg118720.html#msg118720.  Looks like I lost track of this as well.  Will try to find time soon...

Offline stahta01

  • Lives here!
  • ****
  • Posts: 7678
    • My Best Post
Re: MCS51 Project unsupported *.o file?
« Reply #4 on: July 12, 2014, 09:38:17 pm »
Related link: http://forums.codeblocks.org/index.php/topic,16463.msg118720.html#msg118720.  Looks like I lost track of this as well.  Will try to find time soon...

I think splitting the compiler into .o and .rel object file types would be a reasonable quick fix.

No idea if the PIC is the only one needing .o object files; if yes, then calling it SDCC PIC as was suggested in the other thread sounds good to me.

Might be worth it to even split SDCC more if there is a large difference in compiler options for the back ends.

Tim S.
C Programmer working to learn more about C++ and Git.
On Windows 7 64 bit and Windows 10 64 bit.
--
When in doubt, read the CB WiKi FAQ. http://wiki.codeblocks.org

Offline zaazbb

  • Multiple posting newcomer
  • *
  • Posts: 14
Re: MCS51 Project unsupported *.o file?
« Reply #5 on: July 13, 2014, 03:53:41 pm »
Actually SDCC uses .rel extension instead of .o extension for object files. You have to configure CB to use .rel extension in the advanced settings somewhere.

Where can i set the output file extension? I can not find the option?

Offline zaazbb

  • Multiple posting newcomer
  • *
  • Posts: 14
Re: MCS51 Project unsupported *.o file?
« Reply #6 on: July 13, 2014, 04:08:39 pm »
I find it.
in Compiler>other settings>Advanced options>others.
need reopen the project.

thanks.