The 26 february 2007 build is out.

[killerbot]

Get quick announcements through the RSS feed http://www.codeblocks.org/nightly/CodeBlock_RSS.xml

A link to the unicode windows wxWidget dll for Code::Blocks : http://prdownload.berlios.de/codeblocks/wxmsw26u_gcc_cb_wx2.6.3p2.7z

To fix the menu alignment bug introduced in wx 2.6.3 [windows only bug] we have patched wx ourselves, and that results in the following alternative dll : http://prdownload.berlios.de/codeblocks/wxmsw26u_gcc_cb_wx2.6.3p2AndCbPatch_version3.7z

For those who might need this one (when no MingW installed on your system) : the mingw10m.dll : http://prdownload.berlios.de/codeblocks/mingwm10.7z

For support of ansi builds, a link to the ansi windows wxWidget dll for Code::Blocks : http://prdownload.berlios.de/codeblocks/wxmsw26_gcc_cb_wx2.6.3p2.7z

The 26 February 2007 build is out.
  - Windows : http://prdownload.berlios.de/codeblocks/CB_20070226_rev3645_win32.7z
  - Linux :
         http://prdownload.berlios.de/codeblocks/CB_20070226_rev3645_Ubuntu6.xx.deb
         http://prdownload.berlios.de/codeblocks/CB_20070226_rev3645_suse100-102.i586.rpm (not yet)
         http://prdownload.berlios.de/codeblocks/CB_20070226_rev3645_fc4+5.i586.rpm (not yet)


Resolved Fixed:

• wxWidgets Wizard:
  * Wizard now supports creation of wxDialog / wxFrame based app.
  * Wizard now supports wxFormBuilder to be selected as 3rd-Party GUI Builder alongwith wxDialog / wxFrame option.
  * PCH include header has been reverted to wx_pch.h and PCH Pre-Processor definition is changed to WX_PRECOMP
  * EVT_CLOSE has been added in all templates to ensure proper exit
  

Regressions/Confirmed/Annoying/Common bugs:

• toolbar-images-not-changing-state (is a wx problem/Win XP problem)
• menu items with icon not correctly aligned (since wx263) (is fixed with our special wx263/wx28 dll)

[ascxaxsvcbsxbbqvcxqsbcvxs]

On XP Pro, i installed this build, opened CB then immediately clicked on all options in the wxSmith menu => nothing happened (apart from my frustration and a CB crash)

Is it normal? Should not this options be greyed at the beginning?

[Jewe]

RSS feed not updated.?
or is it just my browser that has the problem?  :lol:
Last version was 2007-02-21

cheers,

Jeffrey

[killerbot]

nope, because I normally do this from home. But due to moving on the forum, I could not post yesterday evening and as such no link where the rss entry could point to. Will be updated this evening.

[ascxaxsvcbsxbbqvcxqsbcvxs]

On XP Pro, i installed this build, opened CB then immediately clicked on all options in the wxSmith menu => nothing happened (apart from my frustration and a CB crash)

Is it normal? Should not this options be greyed at the beginning?

I reproduced the crash: if you click several times on the wxSmith options, then File|Quit, CB exits with the message box (personnal translation)
[...] memory cannot be "read".
Click OK to exit the program.

[byo]

On XP Pro, i installed this build, opened CB then immediately clicked on all options in the wxSmith menu => nothing happened (apart from my frustration and a CB crash)

Is it normal? Should not this options be greyed at the beginning?

I couldn't make it happen :? Can you provide some more info ? CPU speed, do you use "fixed" wxWidgets lib, post codeblocks.RPT file (it's crash report placed in same dir where codeblocks.exe)

[ascxaxsvcbsxbbqvcxqsbcvxs]

On XP Pro, i installed this build, opened CB then immediately clicked on all options in the wxSmith menu => nothing happened (apart from my frustration and a CB crash)

Is it normal? Should not this options be greyed at the beginning?

I couldn't make it happen :? Can you provide some more info ? CPU speed, do you use "fixed" wxWidgets lib, post codeblocks.RPT file (it's crash report placed in same dir where codeblocks.exe)

CPU Speed: 2GHz
No lib, no .RPT: i just installed, opened CB, used the menu without any CB response, then Quit => Crash

The message box appeared after CB windows disappeared: maybe that's why there wasn't any rpt file.

For the first crash, i had clicked 4 times on the wxSmith options, and all 3 were chosen at least one time.
For the second, i had clicked 20 or 30 times randomly and quickly on the wxSmith options.

Finally, i didn't try on clicking on other options than wxSmith: maybe a menu problem? will try

EDIT: Another crash.
I clicked not so quickly a dozen times on the wxSmith options.
I confirm, no rpt file.
The message box says (personnal translation):

[Title]codeblocks.exe - Application error
The instruction at "0x61a031a6" use memory address "0x02400eac". Memory cannot be "read".
Click on OK to terminate the program.

The 2 addresses above are the real ones on the message box.

[Biplab]

I don't want to add more confusion to this problem.

I did notice this problem. But NOT with wxSmith. I was working with compiler plugin and found in some cases it's showing similar problem.

So my guess, it could be some other part which is causing the problem.

I can remember one instance when the compilation stopped due to some errors and I was shutting C::B down and it threw that message. Will try to gather more information on that.

[ascxaxsvcbsxbbqvcxqsbcvxs]

I now reproduce it easily on XP Pro.

1) open CB
2) 6 times:

• Click on wxSmith|Add wxPanel   [No response expected]
• Click on wxSmith|Configure wxSmith for current project   [No response expected]

3) Click on File|Quit
4) If no crash message, try again steps 1 to 3, with a greater value at step 2: 7, 8, 9, 10, 11, 12
If it crashes at a given value, you have to increases the loop value to crash again CB.

The dialogbox always says
[Title]codeblocks.exe - Application error
The instruction at "0x61a031a6" use memory address "0x02400eac". Memory cannot be "read".
Click on OK to terminate the program.

The instruction address is always the same.
The memory address is either "0x02400eac" or a number not far away.

[Xaviou]

Hi all.
I tried to make an Ubuntu 6.10 Amd64 package.

Can someone try it, and give feedback, please.

You can find it here.

[Edit] Link wasn't working : updated. :?

[MortenMacFly]

I now reproduce it easily on XP Pro.

Sorry, I couldn't. I really tried as you have described with all those steps but no crash. (Anyway - I'm kind of nuts now ;-)).
Could you try to disabled plugins step-by-step (e.g. starting with the keybinder plugin) and see if at some points the crash disappears?
It sounds really strange anyway! Because actually (if I look at the wxSmith code) her really happens just *nothing* whenever you click such a menu item. So I'm pretty sure that wxSmith is not the issue.
With regards, Morten.

[byo]

I now reproduce it easily on XP Pro.

Sorry, I couldn't. I really tried as you have described with all those steps but no crash. (Anyway - I'm kind of nuts now ;-)).
Could you try to disabled plugins step-by-step (e.g. starting with the keybinder plugin) and see if at some points the crash disappears?
It sounds really strange anyway! Because actually (if I look at the wxSmith code) her really happens just *nothing* whenever you click such a menu item. So I'm pretty sure that wxSmith is not the issue.
With regards, Morten.

The only thing that comes into my mind is invalid order of destruction of static object instances. wxSmith uses both static global member variables and static variables in function. But if that the cause, it will be compiler's fault

[watt]

Hi!


How i can resolve this problem ...

Compiling: main.cpp
mingw32-g++.exe: installation problem, cannot exec `cc1plus': No such file or directory
Process terminated with status 1 (0 minutes, 0 seconds)
0 errors, 0 warnings

[stahta01]

Hi!


How i can resolve this problem ...

Compiling: main.cpp
mingw32-g++.exe: installation problem, cannot exec `cc1plus': No such file or directory
Process terminated with status 1 (0 minutes, 0 seconds)
0 errors, 0 warnings

Install and Setup minGW right.
What OS?
What mingGW?
How was it installed? Unpacked files? Used exe? Which files?
What is the directory path minGW was installed in? C:\minGW or where else?
Tim S

[RJP Computing]

Hi!


How i can resolve this problem ...

Compiling: main.cpp
mingw32-g++.exe: installation problem, cannot exec `cc1plus': No such file or directory
Process terminated with status 1 (0 minutes, 0 seconds)
0 errors, 0 warnings

I have the same problem with Windows Vista and MinGW v3.4.5.  MinGW is installed to 'C:\MinGW' using there installer MinGW v5.1.3.exe. Is there any solution?

I think I am about done with Vista for a while. It won't work with VNC (RealVNC free, UltraVNC, or TightVNC) either. It just keeps getting in my way. It is also just so different I should just switch to Linux for good now. Microsoft is out of there mind! Sorry my rant is over.