Recent Posts

41

Help / Re: Compiler Optimizations

« Last post by mikejp56 on April 19, 2024, 08:56:08 pm »

Hi stahta01,
I have set the compiler optimizations to 1, 2, and 3, but this issue still occurs. There was another post about using the compiler optimizations to solve an issue that I saw.
I just tried the same code with MPLABX with the same results, and the same warning message, so it doesn't appear to be a CB issue. I am just reaching out for help from people with way more experience than me.
Regards,
mikejp56

42

Help / Re: Compiler Optimizations

« Last post by stahta01 on April 19, 2024, 08:46:25 pm »

https://www.avrfreaks.net/s/topic/a5C3l000000UUx7EAG/t132775

Over a decade old post; where user found problem in Code::Blocks global compiler settings.

Tim S.

43

Help / Re: Compiler Optimizations

« Last post by mikejp56 on April 19, 2024, 08:27:22 pm »

Hi Miguel,
Here is the text of the build log. From what I have read it appears to have something to do with compiler optimizations.
Thanks for your time.

-------------- Build: Debug in Binary_Clock_Mods (compiler: GNU GCC Compiler for AVR)---------------

avr-gcc -Wall -mmcu=atmega328p -DF_CPU=16000000UL -g  -c main.c -o obj/Debug/main.o
avr-gcc  -o bin/Debug/Binary_Clock_Mods.elf obj/Debug/fuse.o obj/Debug/main.o  -mmcu=atmega328p -Wl,-Map=bin/Debug/Binary_Clock_Mods.map,--cref 
In file included from main.c:18:0:
/usr/lib/avr/include/util/delay.h:112:3: warning: #warning "Compiler optimizations disabled; functions from <util/delay.h> won't work as designed" [-Wcpp]
 # warning "Compiler optimizations disabled; functions from <util/delay.h> won't work as designed"
   ^
Output file is bin/Debug/Binary_Clock_Mods.elf with size 31.85 KB
Running project post-build steps
avr-objdump -h -S bin/Debug/Binary_Clock_Mods.elf > bin/Debug/Binary_Clock_Mods.lss
avr-objcopy -R .eeprom -R .fuse -R .lock -R .signature -O ihex bin/Debug/Binary_Clock_Mods.elf bin/Debug/Binary_Clock_Mods.hex
avr-objcopy --no-change-warnings -j .eeprom --change-section-lma .eeprom=0 -O ihex bin/Debug/Binary_Clock_Mods.elf bin/Debug/Binary_Clock_Mods.eep
avr-objcopy --no-change-warnings -j .lock --change-section-lma .lock=0 -O ihex bin/Debug/Binary_Clock_Mods.elf bin/Debug/Binary_Clock_Mods.lock
avr-objcopy --no-change-warnings -j .signature --change-section-lma .signature=0 -O ihex bin/Debug/Binary_Clock_Mods.elf bin/Debug/Binary_Clock_Mods.sig
avr-objcopy --no-change-warnings -j .fuse --change-section-lma .fuse=0 -O ihex bin/Debug/Binary_Clock_Mods.elf bin/Debug/Binary_Clock_Mods.fuse
srec_cat bin/Debug/Binary_Clock_Mods.fuse -Intel -crop 0x00 0x01 -offset  0x00 -O bin/Debug/Binary_Clock_Mods.lfs -Intel
srec_cat bin/Debug/Binary_Clock_Mods.fuse -Intel -crop 0x01 0x02 -offset -0x01 -O bin/Debug/Binary_Clock_Mods.hfs -Intel
/bin/sh: 1: srec_cat: not found
Process terminated with status 127 (0 minute(s), 0 second(s))
0 error(s), 1 warning(s) (0 minute(s), 0 second(s))
 

-------------- Build file: Debug in Binary_Clock_Mods (compiler: GNU GCC Compiler for AVR)---------------

Nothing to be done (all items are up-to-date).

44

Help / Re: Compiler Optimizations

« Last post by Miguel Gimenez on April 19, 2024, 07:45:58 pm »

Post a full rebuild log.

45

Help / Compiler Optimizations

« Last post by mikejp56 on April 19, 2024, 06:34:52 pm »

Hi All,
I am using CB with Linux Mint 20. I get the following warning "/usr/lib/avr/include/util/delay.h:112:3: warning: #warning "Compiler optimizations disabled; functions from <util/delay.h> won't work as designed" [-Wcpp]
 # warning "Compiler optimizations disabled; functions from <util/delay.h> won't work as designed"
I have set the compiler optimizations for 1, 2, and 3, but I still get the same warning.
I am pretty new to CodeBlocks and AVR programming.
Please point me in the correct direction.
Thanks for reading.
Regards,
mikejp56

46

Using Code::Blocks / Re: gdb of better compiler not working

« Last post by Miguel Gimenez on April 19, 2024, 01:55:30 pm »

GNU has changed the output of the "info breakpoints" command in GDB 13. From Sourceware change log:

* "info breakpoints" now displays enabled breakpoint locations of
  disabled breakpoints as in the "y-" state.  For example:

   (gdb) info breakpoints
   Num     Type           Disp Enb Address            What
   1       breakpoint     keep n   <MULTIPLE>
   1.1                         y-  0x00000000000011b6 in ...
   1.2                         y-  0x00000000000011c2 in ...
   1.3                         n   0x00000000000011ce in ...

The Enb column previously showed 'y' or 'n', now it shows 'y-' or 'n'. This may be fooling the debugger plugin.

47

Using Code::Blocks / Re: gdb of better compiler not working

« Last post by Grit Clef on April 19, 2024, 12:51:43 pm »

Then maybe Xaviou's build can be suitable?

48

Plugins development / Re: Code completion using LSP and clangd

« Last post by MaxGaspa on April 19, 2024, 11:24:34 am »

I see that you're not clicking either inside a class or a function.
Do this, after the clicked file has parsed, click inside a function, not at the top of an editor file.

Yes, clicking inside a function or class works. Thanks

49

Using Code::Blocks / Re: gdb of better compiler not working

« Last post by nenin on April 19, 2024, 07:43:50 am »

Never mind I ve figured it out turns out these nightly versions do not support 13.2 yet. So I have switched to 13.1 and now it works.

I have nighties (including last one) running with 13.2 gcc (nixman) without such problems. 

50

Using Code::Blocks / Re: gdb of better compiler not working

« Last post by nenin on April 19, 2024, 07:41:48 am »

Recent GDB introduced some changes in the output so parsing failed. This was fixed in r13162 a year ago, try the last nightly.

Here is potential other issue: The 01 April 2024 build (13496) is actually built with gcc 13.2, all its dlls- with gcc 13.1. At my experience  mixing of the c++ libraries is a lottery.