1
Using Code::Blocks / Re: ClangD causing cc1plus.exe error pop up dialog on Windows
« Last post by stahta01 on Today at 03:52:02 pm »Somewhere there is a setting for which clangd is used by Code::Blocks check that is correct.
News:
The new Release 25.03 is out! You can download binaries for Windows and many major Linux distros here .
Recent Posts
2
Using Code::Blocks / Re: ClangD causing cc1plus.exe error pop up dialog on Windows
« Last post by gd_on on Today at 12:11:16 pm »Your installation look strange. If your rename solves the problem, it's probably because you use something inside mingw32, so you mix 32 and 64 bits exes. Check the paths and their order.
I use also msys2 distribution, also with clangd which is inside c:\msys64\mingw64\bin (as installed by mingw-w64-x86_64-clang-tools-extra msys2 package). As I use only 64 bits, all folders like C:\msys64\mingw32, C:\msys64\clang32 or C:\msys64\clang64 contain only empty folders, so for me, no way to use something there.
I use also msys2 distribution, also with clangd which is inside c:\msys64\mingw64\bin (as installed by mingw-w64-x86_64-clang-tools-extra msys2 package). As I use only 64 bits, all folders like C:\msys64\mingw32, C:\msys64\clang32 or C:\msys64\clang64 contain only empty folders, so for me, no way to use something there.
3
General (but related to Code::Blocks) / What can i do?
« Last post by Toosed04 on Today at 09:06:53 am »Hello,
My autocomplete is not working. It complates char,switch or variable names, but it does not complate functions like scanf printf. What is the problem. I checked my editor setting to activate code completion but it is active. What can i do? Thanks.
My autocomplete is not working. It complates char,switch or variable names, but it does not complate functions like scanf printf. What is the problem. I checked my editor setting to activate code completion but it is active. What can i do? Thanks.
4
General (but related to Code::Blocks) / What parts should I uninstall
« Last post by Puffined on Today at 06:57:56 am »All, I just upgraded from 16 to 20 (uninstalled 16 and installed 20) and the install size increased by almost 400Meg?? Where does this huge increase in size come from?
The 16 installer with MinGW is 83,783,938 bytes, for 20 it is 172,470,285 bytes that is nearly double the size compressed. I use Code::Blocks on a VM guest where space is at a premium.
What parts should I uninstall (the plugins?) to reduce the size of the install?
The 16 installer with MinGW is 83,783,938 bytes, for 20 it is 172,470,285 bytes that is nearly double the size compressed. I use Code::Blocks on a VM guest where space is at a premium.
What parts should I uninstall (the plugins?) to reduce the size of the install?
5
Using Code::Blocks / Re: ClangD causing cc1plus.exe error pop up dialog on Windows
« Last post by Wkerry on Today at 06:08:27 am »If I rename the C:\msys64\mingw32 directory to C:\msys64\mingw32.test I do not get the error pop up.
6
Using Code::Blocks / Re: ClangD causing cc1plus.exe error pop up dialog on Windows
« Last post by Wkerry on Today at 06:05:37 am »I am not mixing MINGW64 and CLANG64. Clangd client is doing the "mixing", but I cannot figure out the mixing it is doing.
I have the compiler default set to GNU GCC MSYS MingW64 with the install directory set to C:\msys64\mingw64
The clangd plugin is configured for the clangd exe as:
C:\msys64\mingw64\bin\clangd.exe
The --version shows that the gcc.exe and clangd.exe work correctly if they are used, so some other gcc.exe or clangd.exe is being called. I will rename the MSYS\*.32 directories and see if this helps.
I have the compiler default set to GNU GCC MSYS MingW64 with the install directory set to C:\msys64\mingw64
The clangd plugin is configured for the clangd exe as:
C:\msys64\mingw64\bin\clangd.exe
The --version shows that the gcc.exe and clangd.exe work correctly if they are used, so some other gcc.exe or clangd.exe is being called. I will rename the MSYS\*.32 directories and see if this helps.
7
Using Code::Blocks / Re: ClangD causing cc1plus.exe error pop up dialog on Windows
« Last post by stahta01 on Today at 05:30:20 am »PLEASE do not mix two mingw environments under MSys2 and think it will work!!!!
Mixing MINGW64 and CLANG64 will not work very well and will result in weird errors!!!!!
Tim S.
Code
C:\msys64\clang64\bin>C:\msys64\mingw64\bin\clangd.exe --versionCode
C:\msys64\mingw64\bin\gcc.exe --versionMixing MINGW64 and CLANG64 will not work very well and will result in weird errors!!!!!
Tim S.
8
Using Code::Blocks / Re: ClangD causing cc1plus.exe error pop up dialog on Windows
« Last post by stahta01 on Today at 05:23:40 am »I would try installing the dll that it claims to be missing.
Code
pacman -S mingw-w64-x86_64-mpc9
Using Code::Blocks / ClangD causing cc1plus.exe error pop up dialog on Windows
« Last post by Wkerry on Today at 04:42:48 am »Finally got some time to look into the pop up error below that I ported in March and found that if I disable the clangd plugin the error does to occur, but I cannot get the
---------------------------
cc1plus.exe - System Error
---------------------------
The code execution cannot proceed because libmpc-3.dll was not found. Reinstalling the program may fix this problem.
---------------------------
OK
---------------------------
I have the clangd exe configured as:
C:\msys64\mingw64\bin\clangd.exe
The following command
C:\msys64\clang64\bin>C:\msys64\mingw64\bin\clangd.exe --version
clangd version 20.1.2
Features: windows
Platform: x86_64-w64-windows-gnu
I have the compiler default set to GNU GCC MSYS MingW64 with the install directory set to C:\msys64\mingw64
I get the following gcc version:
C:\msys64\mingw64\bin\gcc.exe --version
gcc.exe (Rev3, Built by MSYS2 project) 14.2.0
Copyright (C) 2024 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
There is nothing logged in the debug log even after adding the following parameters when I start C::B from the C:\Program Files\CodeBlocks directory
codeblocks.exe /d /v
I am using C::B 2025.3 64 bit without the Winlib compiler
Any ideas where to look or what to check or what to change to get rid of the error dialog?
---------------------------
cc1plus.exe - System Error
---------------------------
The code execution cannot proceed because libmpc-3.dll was not found. Reinstalling the program may fix this problem.
---------------------------
OK
---------------------------
I have the clangd exe configured as:
C:\msys64\mingw64\bin\clangd.exe
The following command
C:\msys64\clang64\bin>C:\msys64\mingw64\bin\clangd.exe --version
clangd version 20.1.2
Features: windows
Platform: x86_64-w64-windows-gnu
I have the compiler default set to GNU GCC MSYS MingW64 with the install directory set to C:\msys64\mingw64
I get the following gcc version:
C:\msys64\mingw64\bin\gcc.exe --version
gcc.exe (Rev3, Built by MSYS2 project) 14.2.0
Copyright (C) 2024 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
There is nothing logged in the debug log even after adding the following parameters when I start C::B from the C:\Program Files\CodeBlocks directory
codeblocks.exe /d /v
I am using C::B 2025.3 64 bit without the Winlib compiler
Any ideas where to look or what to check or what to change to get rid of the error dialog?
10
Help / Re: Most download links for CB 25.03 not working
« Last post by gtafan on Yesterday at 04:34:03 pm »For everybody having problem downloading 32 bit Windows version here the link:
https://sourceforge.net/projects/codeblocks/files/Binaries/25.03/Windows/32bit/
Thanks to stahta01
https://sourceforge.net/projects/codeblocks/files/Binaries/25.03/Windows/32bit/
Thanks to stahta01