User forums > Using Code::Blocks

Help:undefined reference to `_XXXX` while the codes uses XXXX.

<< < (2/2)

tuco2009:
Ihave same problem when run make:

--- Code: ---/home/admin/LinuxCNC/emc2-2.3.5/src/hal/user_comps/modbus.c:948: undefined reference to `g_print'
/home/admin/LinuxCNC/emc2-2.3.5/src/hal/user_comps/modbus.c:962: undefined reference to `g_print'
/home/admin/LinuxCNC/emc2-2.3.5/src/hal/user_comps/modbus.c:1012: undefined reference to `g_print'
objects/hal/user_comps/modbus.o: In function `modbus_connect_tcp':
/home/admin/LinuxCNC/emc2-2.3.5/src/hal/user_comps/modbus.c:1231: undefined reference to `g_print'
objects/hal/user_comps/modbus.o: In function `error_treat':
/home/admin/LinuxCNC/emc2-2.3.5/src/hal/user_comps/modbus.c:135: undefined reference to `g_print'
objects/hal/user_comps/modbus.o:/home/admin/LinuxCNC/emc2-2.3.5/src/hal/user_comps/modbus.c:279: more undefined references to `g_print' follow
objects/hal/user_comps/modbus.o: In function `check_crc16':
/home/admin/LinuxCNC/emc2-2.3.5/src/hal/user_comps/modbus.c:437: undefined reference to `g_strdup_printf'
/home/admin/LinuxCNC/emc2-2.3.5/src/hal/user_comps/modbus.c:441: undefined reference to `g_free'
objects/hal/user_comps/modbus.o: In function `receive_response':
/home/admin/LinuxCNC/emc2-2.3.5/src/hal/user_comps/modbus.c:342: undefined reference to `g_print'
/home/admin/LinuxCNC/emc2-2.3.5/src/hal/user_comps/modbus.c:352: undefined reference to `g_print'
/home/admin/LinuxCNC/emc2-2.3.5/src/hal/user_comps/modbus.c:377: undefined reference to `g_print'
/home/admin/LinuxCNC/emc2-2.3.5/src/hal/user_comps/modbus.c:396: undefined reference to `g_print'
/home/admin/LinuxCNC/emc2-2.3.5/src/hal/user_comps/modbus.c:404: undefined reference to `g_print'
objects/hal/user_comps/modbus.o:/home/admin/LinuxCNC/emc2-2.3.5/src/hal/user_comps/modbus.c:1277: more undefined references to `g_print' follow
objects/hal/user_comps/modbus.o: In function `modbus_response':
/home/admin/LinuxCNC/emc2-2.3.5/src/hal/user_comps/modbus.c:537: undefined reference to `g_strdup_printf'
/home/admin/LinuxCNC/emc2-2.3.5/src/hal/user_comps/modbus.c:541: undefined reference to `g_free'
objects/hal/user_comps/modbus.o: In function `preset_multiple_registers':
/home/admin/LinuxCNC/emc2-2.3.5/src/hal/user_comps/modbus.c:847: undefined reference to `g_print'
objects/hal/user_comps/modbus.o: In function `force_multiple_coils':
/home/admin/LinuxCNC/emc2-2.3.5/src/hal/user_comps/modbus.c:796: undefined reference to `g_print'
objects/hal/user_comps/modbus.o: In function `read_input_registers':
/home/admin/LinuxCNC/emc2-2.3.5/src/hal/user_comps/modbus.c:684: undefined reference to `g_print'
objects/hal/user_comps/modbus.o: In function `read_holding_registers':
/home/admin/LinuxCNC/emc2-2.3.5/src/hal/user_comps/modbus.c:665: undefined reference to `g_print'

--- End code ---
What have i do?

Jenna:

--- Quote from: tuco2009 on May 01, 2010, 08:36:49 am ---What have i do?

--- End quote ---

Read the documentation or ask in a related forum.

Note: our forum is not dedicated to answer general programming questions or questions related to special toolkits or libs.
It's "just" a C::B forum, and C::B is "just" an IDE and not a compiler, toolkit, library or whatever.

Navigation

[0] Message Index

[*] Previous page