Author Topic: Setting up OpenGL on Code:Blocks  (Read 4204 times)

Offline twcp0104

  • Single posting newcomer
  • *
  • Posts: 2
Setting up OpenGL on Code:Blocks
« on: February 24, 2024, 07:30:53 pm »
Hello all.

I've been trying to set up code blocks for openGL and have been having a lot of trouble. I was wondering if anybody could lend me a hand.

ok, here's what I did.
1) downloaded freeglut, put freeglut.lib in the lib folder of mingw, put freeglut.h in include/gl of mingw.
2) I editted the wizard file to change glut32 to free glut. I did the same to the template file
3)Created a new project with the opengl template.

this is the code i've been trying to run (it's just the standard test program for codeblocks):

/*
 * GLUT Shapes Demo
 *
 * Written by Nigel Stewart November 2003
 *
 * This program is test harness for the sphere, cone
 * and torus shapes in GLUT.
 *
 * Spinning wireframe and smooth shaded shapes are
 * displayed until the ESC or q key is pressed.  The
 * number of geometry stacks and slices can be adjusted
 * using the + and - keys.
 */
#include <windows.h>
#ifdef __APPLE__
#include <GLUT/glut.h>
#else
#include <GL/glut.h>
#endif

#include <stdlib.h>

static int slices = 16;
static int stacks = 16;

/* GLUT callback Handlers */

static void resize(int width, int height)
{
    const float ar = (float) width / (float) height;

    glViewport(0, 0, width, height);
    glMatrixMode(GL_PROJECTION);
    glLoadIdentity();
    glFrustum(-ar, ar, -1.0, 1.0, 2.0, 100.0);

    glMatrixMode(GL_MODELVIEW);
    glLoadIdentity() ;
}

static void display(void)
{
    const double t = glutGet(GLUT_ELAPSED_TIME) / 1000.0;
    const double a = t*90.0;

    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
    glColor3d(1,0,0);

    glPushMatrix();
        glTranslated(-2.4,1.2,-6);
        glRotated(60,1,0,0);
        glRotated(a,0,0,1);
        glutSolidSphere(1,slices,stacks);
    glPopMatrix();

    glPushMatrix();
        glTranslated(0,1.2,-6);
        glRotated(60,1,0,0);
        glRotated(a,0,0,1);
        glutSolidCone(1,1,slices,stacks);
    glPopMatrix();

    glPushMatrix();
        glTranslated(2.4,1.2,-6);
        glRotated(60,1,0,0);
        glRotated(a,0,0,1);
        glutSolidTorus(0.2,0.8,slices,stacks);
    glPopMatrix();

    glPushMatrix();
        glTranslated(-2.4,-1.2,-6);
        glRotated(60,1,0,0);
        glRotated(a,0,0,1);
        glutWireSphere(1,slices,stacks);
    glPopMatrix();

    glPushMatrix();
        glTranslated(0,-1.2,-6);
        glRotated(60,1,0,0);
        glRotated(a,0,0,1);
        glutWireCone(1,1,slices,stacks);
    glPopMatrix();

    glPushMatrix();
        glTranslated(2.4,-1.2,-6);
        glRotated(60,1,0,0);
        glRotated(a,0,0,1);
        glutWireTorus(0.2,0.8,slices,stacks);
    glPopMatrix();

    glutSwapBuffers();
}


static void key(unsigned char key, int x, int y)
{
    switch (key)
    {
        case 27 :
        case 'q':
            exit(0);
            break;

        case '+':
            slices++;
            stacks++;
            break;

        case '-':
            if (slices>3 && stacks>3)
            {
                slices--;
                stacks--;
            }
            break;
    }

    glutPostRedisplay();
}

static void idle(void)
{
    glutPostRedisplay();
}

const GLfloat light_ambient[]  = { 0.0f, 0.0f, 0.0f, 1.0f };
const GLfloat light_diffuse[]  = { 1.0f, 1.0f, 1.0f, 1.0f };
const GLfloat light_specular[] = { 1.0f, 1.0f, 1.0f, 1.0f };
const GLfloat light_position[] = { 2.0f, 5.0f, 5.0f, 0.0f };

const GLfloat mat_ambient[]    = { 0.7f, 0.7f, 0.7f, 1.0f };
const GLfloat mat_diffuse[]    = { 0.8f, 0.8f, 0.8f, 1.0f };
const GLfloat mat_specular[]   = { 1.0f, 1.0f, 1.0f, 1.0f };
const GLfloat high_shininess[] = { 100.0f };

/* Program entry point */

int main(int argc, char *argv[])
{
    glutInit(&argc, argv);
    glutInitWindowSize(640,480);
    glutInitWindowPosition(10,10);
    glutInitDisplayMode(GLUT_RGB | GLUT_DOUBLE | GLUT_DEPTH);

    glutCreateWindow("GLUT Shapes");

    glutReshapeFunc(resize);
    glutDisplayFunc(display);
    glutKeyboardFunc(key);
    glutIdleFunc(idle);

    glClearColor(1,1,1,1);
    glEnable(GL_CULL_FACE);
    glCullFace(GL_BACK);

    glEnable(GL_DEPTH_TEST);
    glDepthFunc(GL_LESS);

    glEnable(GL_LIGHT0);
    glEnable(GL_NORMALIZE);
    glEnable(GL_COLOR_MATERIAL);
    glEnable(GL_LIGHTING);

    glLightfv(GL_LIGHT0, GL_AMBIENT,  light_ambient);
    glLightfv(GL_LIGHT0, GL_DIFFUSE,  light_diffuse);
    glLightfv(GL_LIGHT0, GL_SPECULAR, light_specular);
    glLightfv(GL_LIGHT0, GL_POSITION, light_position);

    glMaterialfv(GL_FRONT, GL_AMBIENT,   mat_ambient);
    glMaterialfv(GL_FRONT, GL_DIFFUSE,   mat_diffuse);
    glMaterialfv(GL_FRONT, GL_SPECULAR,  mat_specular);
    glMaterialfv(GL_FRONT, GL_SHININESS, high_shininess);

    glutMainLoop();

    return EXIT_SUCCESS;
}


and this is the error ive been receiving:

||=== Build: Debug in LearningOpenGL (compiler: GNU GCC Compiler) ===|
ld.exe||cannot find -lfreeglut|
||error: ld returned 1 exit status|
||=== Build failed: 2 error(s), 0 warning(s) (0 minute(s), 0 second(s)) ===|


It seems like im close to get it working but ive been stuck here for a while, hence the appeal for help. I know it has something to do with the linkers.
pls help


Offline stahta01

  • Lives here!
  • ****
  • Posts: 7678
    • My Best Post
Re: Setting up OpenGL on Code:Blocks
« Reply #1 on: February 24, 2024, 08:13:16 pm »
Adding random files from the Internet to an compiler installation is most likely to not work and even break the compiler installation.
I suggest reading the rules for this website!

https://forums.codeblocks.org/index.php/topic,9996.0.html

Edit: If after reading the rules, you still think it is a valid topic for this website; post a build log in code tags.
https://wiki.codeblocks.org/index.php?title=FAQ-Compiling_%28general%29#Q:_How_do_I_report_a_compilation_problem_on_the_forums.3F

Tim S.
« Last Edit: February 24, 2024, 08:15:26 pm by stahta01 »
C Programmer working to learn more about C++ and Git.
On Windows 7 64 bit and Windows 10 64 bit.
--
When in doubt, read the CB WiKi FAQ. http://wiki.codeblocks.org

Offline Miguel Gimenez

  • Developer
  • Lives here!
  • *****
  • Posts: 1632
Re: Setting up OpenGL on Code:Blocks
« Reply #2 on: February 24, 2024, 08:14:23 pm »
GCC expects libfreeglut.a, the .lib file is probably meant for MSVC and is not compatible.

Offline twcp0104

  • Single posting newcomer
  • *
  • Posts: 2
Re: Setting up OpenGL on Code:Blocks
« Reply #3 on: February 25, 2024, 01:54:33 am »
I appreciate the replies. I will keep trying by myself