Author Topic: The 10 October 2021 build (12535) is out.  (Read 13575 times)

Offline killerbot

  • Administrator
  • Lives here!
  • *****
  • Posts: 5317
The 10 October 2021 build (12535) is out.
« on: October 10, 2021, 08:15:01 am »
We switched to wx 3.1.5 --> download the new wx dll's see link below

Get quick announcements through the RSS feed http://www.codeblocks.org/nightly/CodeBlock_RSS.xml

Before you use a nightly make sure you understand how it works.

A link to the unicode windows wxWidget dll(s) for Code::Blocks : https://sourceforge.net/projects/codeblocks/files/Binaries/Nightlies/Prerequisites/wxmsw31u_gcc_cb_wx315_2D_gcc810-mingw64.7z
A link to Mingw64 dll's needed by Code::Blocks : http://sourceforge.net/projects/codeblocks/files/Binaries/Nightlies/Prerequisites/Mingw64dlls8.1.0.7z


The 10 October 2021 build is out.
  - Windows :
   http://sourceforge.net/projects/codeblocks/files/Binaries/Nightlies/2021/CB_20211010_rev12535_win64.7z
  - Linux :
   none

The current SDK version is : 2.16.0

Resolved Fixed:

  • UI: First fix for the status bar problem (ticket #979)
  • UI: Fix the placement of the Highlight button in the status bar (ticket #979)
  • UI: Also hide/show the highlight button in the statusbar when it is not needed
  • UI: Fix a statusbar flicker when opening new files
  • UI: Fix initial position of the highlight button in the status bar on macOS/windows
  • UI: Remove the call for GetFiledRect while creating the status bar
  • wxSmith: Replace German with English, enable translation (fix ticket #1139, thanks Miguel Gimenez)
  • wxSmith: Fix compilation with wxUSE_STL == 1 (apply ticket #1138, thanks Miguel Gimenez)
  • Fix CCManager compilation with C++17(apply patch #1142, thanks Miguel Gimenez)
  • core For Windows, close shown floating windows before shutdown to avoid hangs in Hide() and crashes in Manager::Shutdown()
  • File Browser: remove workaround for wxRenameFile (apply patch #1137, thanks Miguel Gimenez )
  • wxSmith: fix assert in wxStdDialogButtonSizer (fix ticket #1110, thank you Miguel Gimenez)

Regressions/Confirmed/Annoying/Common bugs:



    Offline Xaviou

    • Regular
    • ***
    • Posts: 341
      • X@v's wxStuff
    Re: The 10 October 2021 build (12535) is out.
    « Reply #1 on: October 10, 2021, 04:44:57 pm »
    Hi

    OS X version of this rev can be downloaded from my Google Drive.
    There is a specific dmg file for versions 10.15 and 11.6 of the OS.
    Note that these are not notarized versions of the application.

    32 bits version for Windows can also be found in the same place.

    Debian Buster and Bullseye (32 and 64 bits) can be installed from my repo.

    Regards
    Xav'
    « Last Edit: October 10, 2021, 04:48:22 pm by Xaviou »
    The french wxWidgets site : http://www.wxdev.fr
    My wxWidgets's stuff : https://wxstuff.xaviou.fr/

    Offline Frank_CB

    • Multiple posting newcomer
    • *
    • Posts: 69
    Re: The 10 October 2021 build (12535) is out.
    « Reply #2 on: October 11, 2021, 05:23:41 am »
    Hello.

    Does sf.net still support SVN. I had been able to update to SVN 12529.  Lately, I just get a message about a malformed address.

    I've updated TortoiseSVN to the latest version. Any help would be appreciated.

    Regards

    Offline BlueHazzard

    • Developer
    • Lives here!
    • *****
    • Posts: 3087
    Re: The 10 October 2021 build (12535) is out.
    « Reply #3 on: October 11, 2021, 09:38:06 am »
    Worked fine for me...
    Maybe some small hiccup?

    Offline Miguel Gimenez

    • Developer
    • Lives here!
    • *****
    • Posts: 917
    Re: The 10 October 2021 build (12535) is out.
    « Reply #4 on: October 11, 2021, 10:52:40 am »
    It is an invalid certificate issue. You can accept the current certificate temporariliy or permanently (at least with Slik SVN).

    Offline Frank_CB

    • Multiple posting newcomer
    • *
    • Posts: 69
    Re: The 10 October 2021 build (12535) is out.
    « Reply #5 on: October 12, 2021, 09:34:38 pm »
    Thanks to those that commented on my question! The problem started after a firewall upgrade was installed. It's now been configured to allow SSL authentication by souceforge.

    Offline Inskipp

    • Multiple posting newcomer
    • *
    • Posts: 11
    Re: The 10 October 2021 build (12535) is out.
    « Reply #6 on: October 17, 2021, 08:53:57 pm »
    Brilliant, thanks for the macOS version!

    I've been using 20.03 for a few weeks on Big Sur, but it's sluggish and buggy.
    This version feels snappier, but when I quit, it freezes, just like 20.03 did.

    Cheers,
    Inskipp

    Offline Inskipp

    • Multiple posting newcomer
    • *
    • Posts: 11
    Re: The 10 October 2021 build (12535) is out.
    « Reply #7 on: October 17, 2021, 09:23:33 pm »
    Where should we report issues with nightly builds?

    Thanks,
    Inskipp

    Offline Miguel Gimenez

    • Developer
    • Lives here!
    • *****
    • Posts: 917
    Re: The 10 October 2021 build (12535) is out.
    « Reply #8 on: October 18, 2021, 09:01:16 am »
    In the ticket section at Sourceforge

    Offline AndyJ

    • Multiple posting newcomer
    • *
    • Posts: 19
    Re: The 10 October 2021 build (12535) is out.
    « Reply #9 on: October 18, 2021, 02:16:15 pm »
    Hello,

    I've found that shift-tab to unindent seems to have changed function in this nightly and now changes the active file. I've reverted to the previous nightly (12516) and the problem has gone away. This is on Windows 7 and occurs on several different computers. Is this an intentional change that I'm not aware or is it a bug?

    Thanks for all the good work!

    Andy

    Offline Miguel Gimenez

    • Developer
    • Lives here!
    • *****
    • Posts: 917
    Re: The 10 October 2021 build (12535) is out.
    « Reply #10 on: October 18, 2021, 02:30:56 pm »
    Works fine for me, are you using the Keyboard Shortcuts plugin?

    Offline AndyJ

    • Multiple posting newcomer
    • *
    • Posts: 19
    Re: The 10 October 2021 build (12535) is out.
    « Reply #11 on: October 18, 2021, 02:49:18 pm »
    It appears that I have but I'm not aware of ever having changed anything (in fact I don't even know to use it)  :)

    Offline Inskipp

    • Multiple posting newcomer
    • *
    • Posts: 11
    Re: The 10 October 2021 build (12535) is out.
    « Reply #12 on: October 18, 2021, 09:05:52 pm »
    In the ticket section at Sourceforge

    Is it OK to use tickets for reporting issues for both nightly and released versions (20.03)?

    Thanks,
    Inskipp

    Offline Miguel Gimenez

    • Developer
    • Lives here!
    • *****
    • Posts: 917
    Re: The 10 October 2021 build (12535) is out.
    « Reply #13 on: October 19, 2021, 10:08:11 am »
    Yes, but if you find a issue in 20.03 please test if it is fixed in the last nightly before reporting.

    Offline jeRRy

    • Single posting newcomer
    • *
    • Posts: 1
    Re: The 10 October 2021 build (12535) is out.
    « Reply #14 on: October 20, 2021, 08:18:55 am »
    Hello.

    I had the same problem with shift-tab on 2 pc.
    My solution on Windows was:
    Close C::B,
    delete (or rename) the file default.cbKeyBinder20.conf in C:\Users\username\AppData\Roaming\Code Blocks,
    start C::B
    C::B creates a new file and it's work

    Sorry, my english is ...  :o  :)

    jeRRy

    Offline AndyJ

    • Multiple posting newcomer
    • *
    • Posts: 19
    Re: The 10 October 2021 build (12535) is out.
    « Reply #15 on: October 21, 2021, 12:11:14 pm »
    After further investigation it seems that disabling the Keyboard Shortcuts plugin resolves the issue and I've yet to encounter any unexpected side effects. Thanks for all the help and pointing me in the right direction.

    Offline Oleg_Sam

    • Multiple posting newcomer
    • *
    • Posts: 30
    Re: The 10 October 2021 build (12535) is out.
    « Reply #16 on: October 24, 2021, 02:32:04 pm »
    Hi All!
    I am have print listing files in my ARM GCC project.
    I add to the "other compiller options"

    -Wa,-adhlns=$(LIST_DIR)\$file_name.lst

    It is not work, because the command macros  $file_name
    is not substitute.
    (The custom variables $(MCU_NAME), $(LIST_DIR) is substituted correctly)
    So, is it possible fix this bug?
    I am using CB nightly 12535 on Windows7
    Thanks!

    Offline Miguel Gimenez

    • Developer
    • Lives here!
    • *****
    • Posts: 917
    Re: The 10 October 2021 build (12535) is out.
    « Reply #17 on: October 24, 2021, 03:23:47 pm »
    Have you tried $(LIST_DIR)\$(FILE_NAME).lst?


    Offline Oleg_Sam

    • Multiple posting newcomer
    • *
    • Posts: 30
    Re: The 10 October 2021 build (12535) is out.
    « Reply #18 on: October 24, 2021, 04:08:29 pm »
    I tried this..
    It's not work, because the macros $(FILE_NAME)
    is not exist...

    Offline Miguel Gimenez

    • Developer
    • Lives here!
    • *****
    • Posts: 917
    Re: The 10 October 2021 build (12535) is out.
    « Reply #19 on: October 24, 2021, 05:19:29 pm »
    Then look here for an existing variable that suits your needs. If there is none, post a feature request in the ticket area

    Offline AndrewCot

    • Regular
    • ***
    • Posts: 329
    Re: The 10 October 2021 build (12535) is out.
    « Reply #20 on: October 25, 2021, 01:47:32 am »
    Just spotted a small build issue with the FortranProject as follows in the 12535 nightly:
      SDK version mismatch for FortranProject (2.14.0). Expecting 2.16.0

    More info:
        The FortranProject.zip has a date of 22-Aug-2021.... , so it looks like it was built at the same time a the rest of the files.


    Something to check in the next nightly build before uploading it.

    Offline tigerbeard

    • Almost regular
    • **
    • Posts: 125
    Re: The 10 October 2021 build (12535) is out.
    « Reply #21 on: October 31, 2021, 11:43:10 pm »
    Here is a small script I use to download the sources for Linux compilation. Note great but saves some typing. Tested on Ubuntu. It does a full svn checkout.  I was not allowed to upload it, so you need to copy the source in a textfile

    To use it, copy it to a textfile "downloadNightlyBuild", and put it to the folder where you want to download the sources, Set the file permissions and run it. You might need to install subversion. This should do all this:
    Code
     sudo apt install subversion            
     chmod 750 downloadNightlyBuild
     ./downloadNightlyBuild                 
    It asks for the build number, for this it would be "12535". The checkout goes into the folder "cbNightly_2021-10-31_ref12535" as of today. If the download gets stuck, the script can be interrupted with Ctrl-C and started again. When it gives a green OK the download is done.

    Shared in the hope some might find it useful.


    source
    Code
    #!/bin/bash
    # downloadNightlyBuild
    # The script downloads a nightly build of CodeBlocks from sourceforge.
    # The links are not given any more at the forum, but the build number
    # is sufficuent to grab the correct sources.
    # use
    #     ./downloadNightlyBuild     
    # Dependencies:
    #  suversion must be installed: on Ubuntu use sudo apt install svn
    # (c) Tigerbeard, 2021, Licence GPL
    Green="tput setaf 2"
    Red="tput setaf 1"
    Normal="tput sgr0"
    Date=`date +"%Y-%m-%d"`

    echo "this downloads a codeblocks nightly build from SourceForge. "
    echo " * you need to enter the build number"
    echo " * the download will be saved into a the folder beside this script"
    echo " * the folder name is generated automatically, existing folders"
    echo "   are re-used (in case the download is interrupted"
    echo " * check the C::B forum page for the correct build number"
    echo ""

    # get build number from user
    echo -n "Build number (enter to cancel): "
    read BuildNumber
    if [ "$BuildNumber" = "" ]; then
     exit
    fi

    # create local target folder
    TargetFolder="cbNightly_"$Date"_rev"$BuildNumber
    echo "  downloading CodeBlocks source build $BuildNumber to folder '$TargetFolder'..."

    # if folder exists, clean up older stuck downloads
    if [ -d "$TargetFolder" ]; then
      echo -n "  svn cleanup................................"
      svn cleanup $TargetFolder                        1>/dev/null 2>&1
      if [ "$?" = "0"  ]; then
      echo "$($Green)OK$($Normal)"
      else
      echo "$($Red)error$($Normal)"
      fi
    fi

    # download
    echo -n "  svn checkout (takes a while)..............."
    svn checkout https://svn.code.sf.net/p/codeblocks/code/trunk@$BuildNumber $TargetFolder/ 1>/dev/null 2>&1
    if [ "$?" = "0"  ]; then
      echo "$($Green)OK$($Normal)"
    else
     echo "$($Red)error$($Normal)"
    fi
    echo
    echo "done"
    echo

    Offline Frank_CB

    • Multiple posting newcomer
    • *
    • Posts: 69
    Re: The 10 October 2021 build (12535) is out.
    « Reply #22 on: November 03, 2021, 09:20:49 pm »
    Can C::B 12535 be used to build itself from source?

    I've used C::B to build itself from source for years. However trying to use C::B 12535 built from source to build SVN 12537 generated an error right out of the blocks. After installling the 12535 nightly, attempting to build SVN 12537 again the same error ocurred.

    The Build Log:
    Code
    -------------- Build: tinyXML in Code::Blocks wx3.1.x (64 bit) (compiler: gnu_x64)---------------

    g++.exe -Wall -std=gnu++11 -m64 -g -pipe -mthreads -fmessage-length=0 -fexceptions -DHAVE_W32API_H -D__WXMSW__ -DWXUSINGDLL -DcbDEBUG -DNOPCH -DwxUSE_UNICODE -D_WIN64 -DEXPORT_LIB -IC:\wxWidgets-3.1.5\lib\gcc_dll64\mswu -IC:\wxWidgets-3.1.5\include -Isdk\wxscintilla\include -Iinclude\tinyxml -Iinclude\tinyxml -c C:\projects\12537\src\base\tinyxml\tinystr.cpp -o .objs31_64\base\tinyxml\tinystr.o
    g++.exe -Wall -std=gnu++11 -m64 -g -pipe -mthreads -fmessage-length=0 -fexceptions -DHAVE_W32API_H -D__WXMSW__ -DWXUSINGDLL -DcbDEBUG -DNOPCH -DwxUSE_UNICODE -D_WIN64 -DEXPORT_LIB -IC:\wxWidgets-3.1.5\lib\gcc_dll64\mswu -IC:\wxWidgets-3.1.5\include -Isdk\wxscintilla\include -Iinclude\tinyxml -Iinclude\tinyxml -c C:\projects\12537\src\base\tinyxml\tinyxml.cpp -o .objs31_64\base\tinyxml\tinyxml.o
    g++.exe -Wall -std=gnu++11 -m64 -g -pipe -mthreads -fmessage-length=0 -fexceptions -DHAVE_W32API_H -D__WXMSW__ -DWXUSINGDLL -DcbDEBUG -DNOPCH -DwxUSE_UNICODE -D_WIN64 -DEXPORT_LIB -IC:\wxWidgets-3.1.5\lib\gcc_dll64\mswu -IC:\wxWidgets-3.1.5\include -Isdk\wxscintilla\include -Iinclude\tinyxml -Iinclude\tinyxml -c C:\projects\12537\src\base\tinyxml\tinyxmlerror.cpp -o .objs31_64\base\tinyxml\tinyxmlerror.o
    g++.exe -Wall -std=gnu++11 -m64 -g -pipe -mthreads -fmessage-length=0 -fexceptions -DHAVE_W32API_H -D__WXMSW__ -DWXUSINGDLL -DcbDEBUG -DNOPCH -DwxUSE_UNICODE -D_WIN64 -DEXPORT_LIB -IC:\wxWidgets-3.1.5\lib\gcc_dll64\mswu -IC:\wxWidgets-3.1.5\include -Isdk\wxscintilla\include -Iinclude\tinyxml -Iinclude\tinyxml -c C:\projects\12537\src\base\tinyxml\tinyxmlparser.cpp -o .objs31_64\base\tinyxml\tinyxmlparser.o
    cmd /c if exist devel31_64\libtxml.a del devel31_64\libtxml.a
    g++.exe -r -s devel31_64\libtxml.a .objs31_64\base\tinyxml\tinystr.o .objs31_64\base\tinyxml\tinyxml.o .objs31_64\base\tinyxml\tinyxmlerror.o .objs31_64\base\tinyxml\tinyxmlparser.o
    g++.exe: error: devel31_64\libtxml.a: No such file or directory
    Process terminated with status 1 (0 minute(s), 14 second(s))
    1 error(s), 0 warning(s) (0 minute(s), 14 second(s))
     
    The line "cmd /c if exist devel31_64\libtxml.a del devel31_64\libtxml.a" was never encounter before.

    Anybody else encountering this change? Or, did I miss an announcement regarding C::B's new behavior regarding using source?

    Regards.


    Offline Frank_CB

    • Multiple posting newcomer
    • *
    • Posts: 69
    Re: The 10 October 2021 build (12535) is out.
    « Reply #23 on: November 04, 2021, 04:32:07 am »
    My bad! I had the wrong executable in the compiler's toolchain for static library. It should be ar.exe for a 64-bit compiler. The change was made and SVN 12537 is now being built by C::B 12535. It was certainly a strange error that prevented C::B being able generate programs.

    Regards