Author Topic: Problem with svn 12446  (Read 2665 times)

Online gd_on

  • Lives here!
  • ****
  • Posts: 650
Problem with svn 12446
« on: May 11, 2021, 04:55:08 pm »
When I try to create a new project, my C::B svn 12446 crashes :
I open C::B normally, then File/New/Project... : crash.
when looking in the RPT file, it seems it's somewhere in sqstd_rex_getsubexp
may be related to svn 12332 or one of the following patches!
« Last Edit: May 11, 2021, 05:21:08 pm by gd_on »
Windows 10 64 bits (21H1), svn C::B (last version or almost!), wxWidgets 3.1.5, Msys2 Compilers 10.3.0, 64 bits (seh, posix : gcc, g++ and gfortran in C:\msys64\mingw64) or 32 bits (sjlj, posix in C:\msys64\mingw32).

Offline Miguel Gimenez

  • Lives here!
  • ****
  • Posts: 713
Re: Problem with svn 12446
« Reply #1 on: May 11, 2021, 05:35:34 pm »
I can't reproduce here. If I put a breakpoint in sqstd_rex_getsubexp() and follow your steps it is not reached, and there is no crash (with or without breakpoint).

My configuration is the same as yours, but I am using 32 bits.

EDIT: I've tested on Windows 7, tonight I will check on Windows 10.
« Last Edit: May 11, 2021, 05:45:35 pm by Miguel Gimenez »

Offline oBFusCATed

  • Developer
  • Lives here!
  • *****
  • Posts: 13313
    • Travis build status
Re: Problem with svn 12446
« Reply #2 on: May 11, 2021, 05:50:04 pm »
Are you sure you've done a clean rebuild of everything?
(most of the time I ignore long posts)
[strangers don't send me private messages, I'll ignore them; post a topic in the forum, but first read the rules!]

Online gd_on

  • Lives here!
  • ****
  • Posts: 650
Re: Problem with svn 12446
« Reply #3 on: May 11, 2021, 06:01:00 pm »
I think so. Before build, I also cleaned totally the devel31_64 directory.
I'll do this again, just to be sure ...
Windows 10 64 bits (21H1), svn C::B (last version or almost!), wxWidgets 3.1.5, Msys2 Compilers 10.3.0, 64 bits (seh, posix : gcc, g++ and gfortran in C:\msys64\mingw64) or 32 bits (sjlj, posix in C:\msys64\mingw32).

Online gd_on

  • Lives here!
  • ****
  • Posts: 650
Re: Problem with svn 12446
« Reply #4 on: May 11, 2021, 07:09:13 pm »
Even after a full clean rebuild, my problem is still there ... :(
Windows 10 64 bits (21H1), svn C::B (last version or almost!), wxWidgets 3.1.5, Msys2 Compilers 10.3.0, 64 bits (seh, posix : gcc, g++ and gfortran in C:\msys64\mingw64) or 32 bits (sjlj, posix in C:\msys64\mingw32).

Offline oBFusCATed

  • Developer
  • Lives here!
  • *****
  • Posts: 13313
    • Travis build status
Re: Problem with svn 12446
« Reply #5 on: May 11, 2021, 07:36:56 pm »
(most of the time I ignore long posts)
[strangers don't send me private messages, I'll ignore them; post a topic in the forum, but first read the rules!]

Offline stahta01

  • Lives here!
  • ****
  • Posts: 7130
    • My Best Post
Re: Problem with svn 12446
« Reply #6 on: May 11, 2021, 07:42:32 pm »
I can't reproduce here. If I put a breakpoint in sqstd_rex_getsubexp() and follow your steps it is not reached, and there is no crash (with or without breakpoint).

My configuration is the same as yours, but I am using 32 bits.

EDIT: I've tested on Windows 7, tonight I will check on Windows 10.

I did not see the problem with win7 Home 64 bit. Built using GCC 8.1.0 and wxWidgets git master 6 to 10 days old.

Tim S.
C Programmer working to learn more about C++ and Git.
On Windows 7 64 bit and Windows 10 32 bit.
On Debian Stretch, compiling CB Trunk against wxWidgets 3.0.
--
When in doubt, read the CB WiKi FAQ. http://wiki.codeblocks.org

Offline Miguel Gimenez

  • Lives here!
  • ****
  • Posts: 713
Re: Problem with svn 12446
« Reply #7 on: May 11, 2021, 08:50:33 pm »
Works OK on W10 H2, wx3.1.5, everything using 64 bits, MinGW_w64 compiler (x86_64-8.1.0-release-posix-seh-rt_v6-rev0)

Offline MortenMacFly

  • Administrator
  • Lives here!
  • *****
  • Posts: 9614
Re: Problem with svn 12446
« Reply #8 on: May 12, 2021, 06:53:46 am »
...I've deleted the "out-of-bound" discussion to close the moderator report.
Once all have calm-down, start again your Q&A. And always take it easy... 8)

My 2 cents: If you build C::B yourself you should have a debug build. So if you run that (in the develXX folder), the crash handler will provide information about code lines.
However, what confuses me is that the crash seems related to sorting a UI control. Why does Squirrel kick-in at all?
And also, am I getting it right that it works on Win10 and not on Win7? Anybody here with the same crash on Wind10?
Compiler logging: Settings->Compiler & Debugger->tab "Other"->Compiler logging="Full command line"
C::B Manual: http://www.codeblocks.org/docs/main_codeblocks_en.html
C::B FAQ: http://wiki.codeblocks.org/index.php?title=FAQ

Offline Miguel Gimenez

  • Lives here!
  • ****
  • Posts: 713
Re: Problem with svn 12446
« Reply #9 on: May 12, 2021, 09:43:49 am »
Quote
Am I getting it right that it works on Win10 and not on Win7?

Works for me on W10 (compiled in 32 and 64 bits) and W7 (compiled in 32 bits). I have not tested W7-64.

Online gd_on

  • Lives here!
  • ****
  • Posts: 650
Re: Problem with svn 12446
« Reply #10 on: May 12, 2021, 10:03:01 am »
I think it's a problem in relation with the gcc version on Windows. With gcc 8.1, 64 bits, as used by Killerbot or M. Gimenez, it's OK.
I use myself gcc 10.3, in mingw64 (so 64 bits) included with msys2 distribution. I had already some problems with this (but gcc 10.2) : problem with .chm files (now solved) or problem in filent.c (patch proposed in ticket 1086, but still not integrated in official version because need some verifications with other compilers) apparently caused by a wrong length of some pointers. gcc 8.1 seems to have no problems with this (but I think there is an error), but gcc 10.3 is more strict with that may be.
I'm triing to compile C::B in different configurations to try to better understand what happens.
Windows 10 64 bits (21H1), svn C::B (last version or almost!), wxWidgets 3.1.5, Msys2 Compilers 10.3.0, 64 bits (seh, posix : gcc, g++ and gfortran in C:\msys64\mingw64) or 32 bits (sjlj, posix in C:\msys64\mingw32).

Online gd_on

  • Lives here!
  • ****
  • Posts: 650
Re: Problem with svn 12446
« Reply #11 on: May 12, 2021, 12:07:58 pm »
Well : here are two new RPT files.
The first one is compiled with giving -g as cb_release_type value. The second one by simply giving a space in that value (so no optimisations). My previous rpt was obtained with -O2.
Looking in those new versions, I see that the error does not seem to come from the same part of code, but from a sort.
More, in the -g version, I see a pointer to a wxIntPtr, but I'm not able to determine if it has the right length (a right click on it in newfromtemplatedlg.cpp does not give me it's declaration, though I suppose it's in wx/types.h). But those files are not recent, so I don't see why it's a problem now, and not before may 9th !
Windows 10 64 bits (21H1), svn C::B (last version or almost!), wxWidgets 3.1.5, Msys2 Compilers 10.3.0, 64 bits (seh, posix : gcc, g++ and gfortran in C:\msys64\mingw64) or 32 bits (sjlj, posix in C:\msys64\mingw32).

Offline oBFusCATed

  • Developer
  • Lives here!
  • *****
  • Posts: 13313
    • Travis build status
Re: Problem with svn 12446
« Reply #12 on: May 12, 2021, 01:22:29 pm »
Please use a debugger.
Also for unoptimized builds please use -g -O0. Looking at builds which doesn't have -g is a waste of time.
The I'm not 100% what are default optimization levels in GCC, so I wouldn't count on them being unoptimized/debugable.
(most of the time I ignore long posts)
[strangers don't send me private messages, I'll ignore them; post a topic in the forum, but first read the rules!]

Online gd_on

  • Lives here!
  • ****
  • Posts: 650
Re: Problem with svn 12446
« Reply #13 on: May 14, 2021, 05:12:51 pm »
I continued my investigations by triing a few compilers, particularly those found on winlibs.
The last version which gives me a working C::B version (at least for this problem), even for svn 12446, is : build version gcc-10.2.0-mingw-w64-8.0.0-r5.
Starting with build version gcc-10.2.0-mingw-w64-8.0.0-r6, I have problems, even with older svn version of C::B. So the problem does not come from squirrel update.
The only difference between these 2 versions concern Gnu Binutils : switch from 2.35.1 to 2.36.
This was also with these versions I had a previous problem (solved for me in filent.c and discussed in https://forums.codeblocks.org/index.php/topic,24363.msg166172.html#msg166172).
Problem exist also with gcc 11.1 as found on winlibs, but also with gcc 10.3 as found with msys2.
I hope this will give some clues to debug C::B by itself. But this is for C::B gurus, not for me  :(
« Last Edit: May 14, 2021, 07:46:23 pm by gd_on »
Windows 10 64 bits (21H1), svn C::B (last version or almost!), wxWidgets 3.1.5, Msys2 Compilers 10.3.0, 64 bits (seh, posix : gcc, g++ and gfortran in C:\msys64\mingw64) or 32 bits (sjlj, posix in C:\msys64\mingw32).

Online gd_on

  • Lives here!
  • ****
  • Posts: 650
Re: Problem with svn 12446
« Reply #14 on: June 07, 2021, 05:42:34 pm »
I also tried the new TDM compiler version based on gcc 10.3 in 64 bits. The problem is the same. No differences if I use svn 12458.
More, the executable codeblocks.exe is considered as containing a virus by my McAfee antivirus software >:(. A false positive, surely. Though I can tell McAfee to ignore this file, it's annoying.
I also tried to debug C::B, but without success : I can't identify the real problem :-[
Windows 10 64 bits (21H1), svn C::B (last version or almost!), wxWidgets 3.1.5, Msys2 Compilers 10.3.0, 64 bits (seh, posix : gcc, g++ and gfortran in C:\msys64\mingw64) or 32 bits (sjlj, posix in C:\msys64\mingw32).