Author Topic: Set remote debug option with Wizard script [SOLVED]  (Read 90667 times)

Offline BlueHazzard

  • Developer
  • Lives here!
  • *****
  • Posts: 3353
Re: Set remote debug option with Wizard script [SOLVED]
« Reply #30 on: May 29, 2017, 05:16:33 pm »
there is a other problem with codeblocks. The debugger deletes all configuration done outside from the plugin. I would like to know form a dev why this was done... The configuration should only be overwritten when you change the options.

This is the problem, so there is still missing a part to fix your problem...

Offline oBFusCATed

  • Developer
  • Lives here!
  • *****
  • Posts: 13413
    • Travis build status
Re: Set remote debug option with Wizard script [SOLVED]
« Reply #31 on: September 29, 2019, 03:19:53 pm »
The changes to the ProjectLoadingHooks are in trunk/master now.
There is also new scripting api for modifying the extensions. It is a lot more capable.

Here is an example what is possible now. You can uncomment some parts to test different functions:
Code
function doListAll(project, extension)
{
    print("  " + extension + "\n");
    local listAttrs = project.ExtensionListNodeAttributes(extension);
    for (local jj=0; jj<listAttrs.GetCount(); ++jj)
    {
        local value = project.ExtensionGetNodeAttribute(extension, listAttrs.Item(jj));
        print(_T("    attr -> ") + listAttrs.Item(jj) + _T(" : ") + value + _T("\n"));
    }

    local list = project.ExtensionListNodes(extension);
    for (local ii=0; ii<list.GetCount(); ++ii)
    {
        doListAll(project, list.Item(ii));
    }
}

function listAll(project, extension)
{
    print("\n=== listAll for " + extension + "!\n");
    doListAll(project, extension);
    print("=== listAll end.\n");
}


function test_dbg()
{
    print("Started testing script!\n");
    local pm = GetProjectManager();
    local project = pm.GetActiveProject();
    if (!project)
        return;
/*
    listAll(project, _T("debugger"));
    listAll(project, _T("debugger/remote_debugging"));
    listAll(project, _T("debugger/remote_debugging[1]"));
    listAll(project, _T("debugger/remote_debugging(target=Debug)"));

    print("\n\nSetting attribute - ip_address\n");
    print("---> project modified: " + project.GetModified() + "\n");
    local modifyExtension = _T("debugger/remote_debugging(target=Debug)/options[0]");
    project.ExtensionSetNodeAttribute(modifyExtension, _T("ip_address"), _T("192.168.0.2"));
    local newValue = project.ExtensionGetNodeAttribute(modifyExtension, _T("ip_address"));

    listAll(project, _T("debugger/remote_debugging(target=Debug)"));
    print("---> new value read: " + newValue + "\n");
    print("---> project modified: " + project.GetModified() + "\n");

    print("\n\nAdding node - debugger/test\n");
    project.SetModified(false); // just reset modified flag to test if mutating function really change it!
    project.ExtensionAddNode(_T("debugger"), _T("test"));
    listAll(project, _T("debugger/test"));
    print("---> project modified: " + project.GetModified() + "\n");

    project.ExtensionSetNodeAttribute(_T("debugger/test"), _T("testAttr"), _T("testValue"));
    listAll(project, _T("debugger/test"));

    print("\n\nRemoving node - debugger/test\n");
    project.SetModified(false); // just reset modified flag to test if mutating function really change it!
    project.ExtensionRemoveNode(_T("debugger/test"));
    listAll(project, _T("debugger"));
    print("---> project modified: " + project.GetModified() + "\n");

    print("\n\nRemoving node - debugger/test\n");
    project.SetModified(false); // just reset modified flag to test if mutating function really change it!
    local modifiedExtension = _T("debugger/remote_debugging[2]/options[0]");
    project.ExtensionRemoveNodeAttribute(modifiedExtension, _T("additional_cmds"));
    listAll(project, modifiedExtension);
    print("---> project modified: " + project.GetModified() + "\n");
*/
/*
    print("\n\nRemoving node - debugger\n");
    project.SetModified(false); // just reset modified flag to test if mutating function really change it!
    project.ExtensionRemoveNode(_T("debugger"));
    project.ExtensionAddNode(_T(""), _T("debugger"));
    local extRD0 = project.ExtensionAddNode(_T("debugger"), _T("remote_debugging"));
    print("extRD0 = " + extRD0 + "\n");
    local extRD0Options = project.ExtensionAddNode(extRD0, _T("options"));
    print("extRD0Options = " + extRD0Options + "\n");
    project.ExtensionSetNodeAttribute(extRD0Options, _T("conn_type"), _T("1"));

    local extRD1 = project.ExtensionAddNode(_T("debugger"), _T("remote_debugging"));
    print("extRD1 = " + extRD1 + "\n");
    project.ExtensionSetNodeAttribute(extRD1, _T("target"), _T("Debug"));
    local extRD1Options = project.ExtensionAddNode(extRD1, _T("options"));
    print("extRD1Options = " + extRD1Options + "\n");
    project.ExtensionSetNodeAttribute(extRD1Options, _T("conn_type"), _T("0"));

    listAll(project, _T("debugger"));
    print("---> project modified: " + project.GetModified() + "\n");

    print("--> conn_type: " + project.ExtensionGetNodeAttribute(extRD0Options, _T("conn_type")) + "\n");
    project.ExtensionSetNodeAttribute(extRD0Options, _T("conn_type"), _T("0"));
    print("--> modified conn_type: " + project.ExtensionGetNodeAttribute(extRD0Options, _T("conn_type")) + "\n");

    listAll(project, _T("debugger"));
    */

    for (local ii = 0; ii < 500; ++ii)
    {
        local name = _T("Debug" + ii);
        print("Duplicate: " + name + "\n");
        project.DuplicateBuildTarget(0, name);
    }

    project.ExtensionRemoveNode(_T("debugger"));
    project.ExtensionAddNode(_T(""), _T("debugger"));

    for (local ii = 0; ii < 500; ++ii)
    {
        local name = _T("Debug" + ii);
        local rd = project.ExtensionAddNode(_T("debugger"), _T("remote_debugging"));
        project.ExtensionSetNodeAttribute(rd, _T("target"), name);
        local rdOpt = project.ExtensionAddNode(rd, _T("options"));

        project.ExtensionSetNodeAttribute(rdOpt, _T("conn_type"), _T("0"));
        project.ExtensionSetNodeAttribute(rdOpt, _T("ip_address"), _T("192.168.0.12"));
        project.ExtensionSetNodeAttribute(rdOpt, _T("ip_port"), _T("1223"));
        project.ExtensionSetNodeAttribute(rdOpt, _T("additional_cmds"), _T("asdf"));
        project.ExtensionSetNodeAttribute(rdOpt, _T("additional_cmds_before"), _T("asdf"));
        project.ExtensionSetNodeAttribute(rdOpt, _T("extended_remote"), _T("1"));
    }

    //project.ExtensionRemoveNode(_T("debugger"));
    //project.ExtensionAddNode(_T(""), _T("debugger"));

    for (local ii = 0; ii < 1000; ++ii)
    {
        local path = project.ExtensionAddNode(_T("debugger"), _T("search_path"));
        project.ExtensionSetNodeAttribute(path, _T("add"), _T("some strange path" + ii));
    }


    //listAll(project, _T("debugger"));
}

test_dbg();

// print(GetProjectManager().GetActiveProject().ExtensionGetNodeAttribute(_T("debugger[0]remote_debugging[1]"), _T("target")));

Note: that this version could create many targets in your project, which is quite slow currently... So you could lower the limit values of the for loops.
(most of the time I ignore long posts)
[strangers don't send me private messages, I'll ignore them; post a topic in the forum, but first read the rules!]

Offline BlueHazzard

  • Developer
  • Lives here!
  • *****
  • Posts: 3353
Re: Set remote debug option with Wizard script [SOLVED]
« Reply #32 on: September 29, 2019, 10:19:03 pm »
Can you add a test to the test scripts for this new functionality?

How does the "new" project loading works? Load the plugin data on activating a project?

Offline oBFusCATed

  • Developer
  • Lives here!
  • *****
  • Posts: 13413
    • Travis build status
Re: Set remote debug option with Wizard script [SOLVED]
« Reply #33 on: September 30, 2019, 12:59:10 am »
I'm not sure if creating a project from a test is a good idea. If you have time you can write some, this way you'll test what I've done, I'm sure I've missed/messed something.

The loading works by parsing the xml data when the plugin needs it - just before starting a debug session, when showing the project options and so on. This means that if something external modifies the settings they would be respected. In the past the parsing happened only on project load or if the project loading hooks have been executed manually.

Unfortunately the autoversion and wxsmith plugins use these hooks in a complex manner, so I couldn't remove them easily and I've postponed this task. :( The idea is to remove project loading hooks.
(most of the time I ignore long posts)
[strangers don't send me private messages, I'll ignore them; post a topic in the forum, but first read the rules!]

Offline jimbo

  • Multiple posting newcomer
  • *
  • Posts: 55
Re: Set remote debug option with Wizard script [SOLVED]
« Reply #34 on: December 11, 2019, 06:20:42 pm »
Thanks for this, in my limited testing it does the job well.