User forums > Help

Codeblocks using AVR-Toolchain supplied with AVR STudio 5.0

(1/1)

drnicolas:
I am quite new to Codeblocks.
On my computer, WinAVR has gone and has been replaced by the brand-new AVR Studio 5.0 (beta?)

The directory-path for the toolchain is as follows:
C:\Elektronik\Atmel\AVR Studio 5.0\extensions\Application\AVR Toolchain\avr

Using this the build process stops immediately with a message
"gcc.exe: CreateProcess: No such file or directory
Process terminated with status 1"

Changing the entry for gcc to "bin/gcc.exe" (was gcc.exe only) does not work also.
Now I get (in red color printed): Execution of 'bin/gcc.exe _complete argument_list_' in 'Z:\codeblocks\projectname' failed.
Nothing to be done.

What deos this mean ? And whta can I do to get the toolchain running again ?

 :(
 

stahta01:
1. Verify the beta compiler works from the cmd prompt.

If it does not, then this is not an Code::Blocks issue.

Note: http://asf.atmel.no/bugzilla/show_bug.cgi?id=306 says it is an Compiler Issue.
But, it also says it uses Cygwin; Code::Blocks has issues using Cygwin gcc from time to time

Tim S.

drnicolas:
Okay, here is some output stuff when running with the -v option

gcc version 4.5.1 (AVR_8_bit_GNU_Toolchain_3.2.0_253)
COLLECT_GCC_OPTIONS='-include' 'z:\CAN-Adapter\CANUSB-Adapter\Firmware\CAN2USB-adapter.h' '-include' 'z:\CAN-Adapter\CANUSB-Adapter\Firmware\CAN2USB.h' '-DF_CPU=16000000UL' '-mmcu=at90can128' '-Wall' '-g3' '-gdwarf-2' '-fpack-struct' '-fshort-enums' '-funsigned-char' '-funsigned-bitfields' '-v' '-c' '-o' 'obj\Debug\CAN-Adapter\CANUSB-Adapter\Firmware\CAN2USB-Adapter.o'
 cc1 -quiet -v -imultilib avr51 -iprefix c:\elektronik\atmel\avr studio 5.0\extensions\application\avr toolchain\avr\bin\../lib/gcc/avr/4.5.1/ -dD -DF_CPU=16000000UL -include z:\CAN-Adapter\CANUSB-Adapter\Firmware\CAN2USB-adapter.h -include z:\CAN-Adapter\CANUSB-Adapter\Firmware\CAN2USB.h ..\..\CAN-Adapter\CANUSB-Adapter\Firmware\CAN2USB-Adapter.c -quiet -dumpbase CAN2USB-Adapter.c -mmcu=at90can128 -auxbase-strip obj\Debug\CAN-Adapter\CANUSB-Adapter\Firmware\CAN2USB-Adapter.o -g3 -gdwarf-2 -Wall -version -fpack-struct -fshort-enums -funsigned-char -funsigned-bitfields -o C:\Users\nico\AppData\Local\Temp\ccEPGx8g.s
gcc.exe: CreateProcess: No such file or directory
Process terminated with status 1 (0 minutes, 0 seconds)
0 errors, 0 warnings

IN my eyes, the compiler is started at first.

stahta01:
A wild guess it can NOT find "cc1"

You really NEED to test this from the cmd line to find the cause!!!

To open an command line window in windows run cmd.exe

Tim S.

drnicolas:
Okay, cc1.exe is available under
C:\Elektronik\Atmel\AVR Studio 5.0\extensions\Application\AVR Toolchain\libexec\gcc\avr\4.5.1

Aftre adding all kinds of search paths the project now compiles successfully.

But it produces only an .elf file, no .hex, no .eep

Navigation

[0] Message Index