Author Topic: CodeBlocks for Arduino - Arduino Builder Startup problems  (Read 6441 times)

Offline MNijland

  • Single posting newcomer
  • *
  • Posts: 3
CodeBlocks for Arduino - Arduino Builder Startup problems
« on: March 20, 2015, 12:49:56 pm »
Hello I am new to CodeBlocks for Arduino (Not with the Arduino IDE) and having trouble to startup the Arduino Builder for uploading the code to the board.

I extracted the files to the ROOT of my "E:\" drive thus starting there with the foldername "CodeBlocks"

I am using a "Leonardo" board and downloaded the latest version from the Sourceforge site for my Windows 7 environment (x64). The used COM port = 30 and I am making use of the default USB connection.

In the image below (or attachment) are the errors I get when trying to start the upload process..
What (and how) to do to solve these..
« Last Edit: March 20, 2015, 04:07:22 pm by MNijland »

Offline oBFusCATed

  • Developer
  • Lives here!
  • *****
  • Posts: 11931
    • Travis build status
Re: CodeBlocks for Arduino - Arduino Builder Startup problems
« Reply #1 on: March 20, 2015, 03:31:21 pm »
Probably it is better to contact the makers of Arduino Builder.


(most of the time I ignore long posts)
[strangers don't send me private messages, I'll ignore them; post a topic in the forum, but first read the rules!]

Offline MNijland

  • Single posting newcomer
  • *
  • Posts: 3
Re: CodeBlocks for Arduino - Arduino Builder Startup problems
« Reply #2 on: March 23, 2015, 07:20:59 pm »
Can't figure out what is going wrong..

Have now been struggeling with it for 2 days, reinstalled eclipse(luna) for arduino and Aduino ide 1.6.0 and both work like a charm..

any ideas ?

Offline stahta01

  • Lives here!
  • ****
  • Posts: 6610
    • My Best Post
Re: CodeBlocks for Arduino - Arduino Builder Startup problems
« Reply #3 on: May 18, 2015, 03:28:14 pm »
Did you choose a serial port the OP did NOT for some unknown reason?

FYI: This site is for supporting Code::Blocks; so, you should ask a question related to Code::Blocks when posting!

Tim S.
C Programmer working to learn more about C++ and Git.
On Windows 7 64 bit and Windows 10 32 bit.
On Debian Stretch, compiling CB Trunk against wxWidgets 3.0.
--
When in doubt, read the CB WiKi FAQ. http://wiki.codeblocks.org

Offline MNijland

  • Single posting newcomer
  • *
  • Posts: 3
Re: CodeBlocks for Arduino - Arduino Builder Startup problems
« Reply #4 on: May 18, 2015, 03:55:02 pm »
Hello,

    yes, also made sure that the serial ports are available and listed, but for whatever reason the plugin will not work. It is only crashing and giving errors as shown in the screenshot and not listing any availble serial ports.

Already gave up on it and are working with eclipse again, and the original Arduino IDE, without having any problems at all..


thanks for your reply..

Offline stahta01

  • Lives here!
  • ****
  • Posts: 6610
    • My Best Post
Re: CodeBlocks for Arduino - Arduino Builder Startup problems
« Reply #5 on: May 18, 2015, 04:47:21 pm »
I suggest all future people who get this issue report the problem to the group that wrote the software.
You ARE using a Fork of CB; report it to them!!!

FYI: If you are NOT using the CB fork; that might be why it is NOT working!!

Edit: You also need to be smart enough to load the hex file!! The OP did NOT do that based on the image.

Tim S.

Hello,

    yes, also made sure that the serial ports are available and listed, but for whatever reason the plugin will not work. It is only crashing and giving errors as shown in the screenshot and not listing any availble serial ports.

Already gave up on it and are working with eclipse again, and the original Arduino IDE, without having any problems at all..


thanks for your reply..
« Last Edit: May 18, 2015, 04:53:39 pm by stahta01 »
C Programmer working to learn more about C++ and Git.
On Windows 7 64 bit and Windows 10 32 bit.
On Debian Stretch, compiling CB Trunk against wxWidgets 3.0.
--
When in doubt, read the CB WiKi FAQ. http://wiki.codeblocks.org